Polymer Li-Ion Rechargeable Battery: 14.8V 20Ah (296Wh, 30A rate, 9759156-5C)

• 14.8V 20 Ah Polymer Li-Ion pack is made by 8 pcs of 3.7V 10Ah Polymer Li-Ion battery in 4S2P configuration 
• Wrapped by heavy duty heat shrink tube

•  1 x 14.8v 30A PCM installed with the battery pack to balance the cells and protects the battery from
  • Overcharge       (>16.8V)
  • Over discharge   ( <10.4V)
  • Over drain        ( > 40 Amp)
  • Short circuits
  • Please wait 30 minutes before usage after the battery is fully charged so the pcm can perform the balance function

• Charge / Discharge Terminal: 6.0" 14AWG Standard male Tamiya connector
• Included 1 pc of  Standard Female Tamiya with 14 awg Silicon wire (150mm) for easy DIY

     166mm (6.6") x 125mm (4.9") x 54mm (2.1")      

• 14.8V 3A Smart Li-ion battery charger - The estimated charging time is around 8 hours
• 14.8V 6A Smart Li-ion battery charger - The estimated charging time is around 4 hours

• We are not responsible for any damages or losses caused by misuse (including but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling battery packs).
• Always pay attention when charging the battery pack. Battery shall be put in a fireproof place or fireproof container to avoid any accident
• Please check battery polarity as we are not liable for any damage due to wrong polarity
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings