Polymer Li-Ion Battery: 25.9V 10Ah (9759156-5C, 259 Wh, 30A rate)

Option 1: Without Fuel Gauge & installed in Aluminium Enclosure

Your Price: From $540.00 to $550.00

Lead Time: 5 Business Days / Hazmat handling fee required*

Product Options

Connector Option:

Quantity:

Email this page to a friend

Features
Applications
Warnings
Related Products

Features

*Important Shipping Regulation	This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more...
Battery	High Power Polymer Li-Ion Battery: 25.9V 10Ah ( 259 Wh, 30A rate) Made by 7 pcs of Polymer Li-Ion PL-9759156-5C cells (7S configuration)
Voltage	25.9V (working), 29.4V ( peak), 17.5V (cut off)
Capacity	10 Ah (259 wh)
Cycle life	>300
Protection & Wire	1x PCM (30A limit) with balance function installed in the battery pack to balance charging and protect battery module from Over discharged beyond 29.4V Over discharged below 17.5V Over drained beyond 30A Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
Prewired	Option 1: Installed in Aluminium Enclosure: 125 x68x196 (mm) (180) without fuel gauge Included 1x Anderson Cable Charge terminal: 3-pin Cannon Female Pin 1 = Positive Pin 2 = Negative / Return Thermister Pin 3 = 10K Thermistor Discharge terminal: 30A Anderson Connector
Prewired	Option 2: Installed in Plastic Enclosure: 200 x120x75 (mm) (10-22) with 1x Fuel Gauge for PCB of 25.9v Li-Ion Battery Pack (7 cells pack) installed on surface of battery pack Touch the switch on the display , you can monitor the energy level of battery pack Charge/Discharge terminal: Copper Barrel Lug terminal attached via Binding Post Barrel Lug terminal size (LxWxH): 0.6" (14mm) x 0.3" (8.0mm) x 0.04" (1.0mm) Binding Post size (DxL): 0.8" (19mm) x 1.2" (30 mm) Red Binding Post = Positive Black Binding Post = Negative
Max. Discharging Rate	30 Amp Limited by PCM
Dimensions(LxWxH)	Option 1: Without Connector: 195mm (7.7") x 125mm (4.9") x 70mm (2.8") With Connector: 210 mm (8.3") x 125mm (4.9") x 70mm (2.8") Option 2: 232mm (9.2") x 120mm (4.8") x 75mm (3.0") L include the Binding Post's length
Weight	5 Lb

Applications

For 24V Ebike .
For RC robot and RC aircraft which need high current drain
Autonomous submarine to drive a 24V DC motor
Replace 24V NiMH battery pack for e-bike
Wheel Chair
Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know more the advantages

Warnings

Please never discharge the battery pack beyond its Max. 30A rating
Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
When you modify the connector, please check the polarity and don't short ciruit the battery.
For safety warning please see the link here
Please use proper AWG wire gauge to match the max discharge current (40A), Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table.
Please plug the charger to the battery pack with correct polarity.
Wrong polarity will damage the charger, and Batteryspace is not responsible for the damage or losses caused by misuse
California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings