About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Polymer Li-Ion Battery: 12V 20Ah (296 Wh 8A rate, 9059156-1C) with Regulator + pre regulator output

Your Price: $459.00
In Stock

Product ID # 9410
Part Number:

Lead Time: 5 Business Days
*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
  • Customize 14.8 V 20Ah pack is made by 4S2P Li-ion Polymer battery
  • Battery is placed in ABS Fire Retardant / water-proof Enclosure(10-22) to protect battery from wet weather
  • The smart battery pack has built in soft-start function from the regulator board
  • Regulated voltage output at 12V with 2 x 4A regulator board
  • Built in Low battery alert function. If battery voltage drops below 11V, a tone sounds for 10 seconds to remind you to recharge the battery.
Voltage        Voltage:14.8V (working)  16.8V ( peak)  11.0V ( cut-off) -    Regulated 12V
Capacity        20 Ah. (296 Wh)
  • One PCM with balance function is installed with the battery pack to protect battery from
  • Overcharging beyond 4.25V/cell
  • Over discharging below 2.75V/cell
  • Over drain beyond 10A
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
  • Two 4.2 Amp polyswitch installed to limit max. discharging current at 8.4A and to protect wrong polarity
  • Regulated 12V output terminal: 4' long Coaxis coil open end cord  
  • Power switch connection: 8" mini male Tamiya
  • 14.8V battery output terminal: 7" 22 AWG open end wire
Max. Discharging Rate        8 Amp limited by regulator
Dimension (LxWxH)        200mm x 120mm x 75mm (7.87" x 4.72" x 2.95")
Weight        2310g  (5.1 lb )
Related Product
  • Lithium battery may be exploded if not using properly. Please refer above specification. We are not responsible for any damages or losses caused by misusing, which include but not limit to:  over charge, over discharge, over current, any changes of this battery pack, disassemble battery pack) .
  • Always charge battery with attention.  Battery pack shall be placed in a fire-proof container during charge to avoid any accident
  • Please check battery polarity before connect battery with device. Never make wrong polarity connection.
  • For safety warning please see the link here
  • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists