 |
 |

|
 |
|
|
Polymer Li-Ion Battery: 12V-13.2V 20Ah (296 Wh 4A rate) with Regulator
|
In Stock
Product ID # 3841 Part Number: PLB-9059156-4S2P
Lead Time: 5 Business Days
Quantity Discounts
Quantity | Amount |
5 to 20 | $445.23 |
21 to 50 | $436.05 |
51 to 100 | $426.87 |
101 or more | $413.10 |
|
|
*Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
Battery |
-
- Battery is placed in Plastic Enclosure(10-22)
- The smart battery pack has built in soft-start function and can replace all kinds of rechargeable batteries for Bike Lights, Halogen Lights or HID up to 50W
- Two selectable regulated voltages at 12V or 13.2V by Power 12V/13.2V/Off switch with BLUE LED indicator
- Center position = "Power off" (LED will be off in about 5 sec after switch from Right/Left position)
- Right position = "13.2VDC 4A Max Output" , "LED = Blue"
- For Higher brightness , please choose 13.2V,
- Left position = "12VDC 4A Max Output" , "LED = Blue"
- By selecting 12V position, the smart Li-Ion battery pack can replace all types of 12V NiMH battery packs with higher energy and much less weight, such as:
- Portable video light battery packs
- Portable radio batteries
- On-the-go battery pack

- Built in Low battery alert function. If battery voltage drops below 11V, a tone sounds for 10 seconds to remind you to recharge the battery.
|
Voltage |
Voltage: 14.8V (working) 16.8V ( peak) 11.0V ( cut-off) |
Capacity |
20 Ah. (296 Wh) |
Protection |
- 1x PCM with balance function (10A each.) is installed with the battery pack to protect battery from
- Overcharging / Overdischarging / Overdrain /Short Circuit
- Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
- 1x 7.0 Amp polyswitch
|
Prewired |
|
Max. Discharge Current |
4 Amp limited by regulator |
Dimension (LxWxH) |
200mm x 120mm x 75mm (7.87" x 4.72" x 2.95") |
Weight |
2585g (5.7 lb ) |
Charger Option |
|
Warning |
- Lithium battery may be exploded if not using properly. Please refer above specification. We are not responsible for any damages or losses caused by misusing, which include but not limit to: over charge, over discharge, over current, any changes of this battery pack, disassemble battery pack) .
- Always charge battery with attention. Battery pack shall be placed in a fire-proof container during charge to avoid any accident
- Please check battery polarity before connect battery with device. Never make wrong polarity connection.
- For safety warning please see the link here
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
|
|
Your Price: Discontinued, replaced by # 7192
|
|
|
|
|
|
|
|
| | |
Product Reviews
|
|
|