 |
 |
 |
PCM with Equilibrium function for 29.6V-59.2V Li-Ion / 25.6V-51.2V LFP Battery Pack @ 16A limit (#6239)
|
|
Product Options
| Voltage: |
|
|
This protection circuit is specially designed for 29.6V-59.2V Li-Ion / 25.6V-51.2V LiFePO4 Battery pack with 16A discharging rate. Different than normal PCB, it provides equilibrium function after battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps Li-Ion cells have longer service life.
| Protection Circuit Module Specifications |
| Model：PCM-SM28 series |
| |
For Li-ion |
For LiFePO4 |
| Charging Voltage (CC/CV) |
4.2V/Cell |
3.60V/Cell |
| Balance Voltage per cell |
4.20±0.025V |
3.60±0.025V |
| Over charge detection voltage |
4.325±0.025V |
3.8±0.025V |
| Over discharge detection voltage |
2.50±0.05V |
|
| Over current detection current |
92±10A |
| Maximal continuous charging current |
16A |
| Maximal continuous discharging current |
16A |
| Current consumption for single cell |
≤20uA |
| Protection circuitry resistance (B- TO P-) |
≤30mΩ |
| Dimension |
110mm x 63.5 mm x 18 mm |
| P+/P- |
P+ = Charge+ / Discharge +
P- = Charge- / Discharge -
|
For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category
Warning
- If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
- To achieve balance, each cell in battery pack must has equal voltage within tolerance. When charger LED turn Green, allow 30 minutes for pack to balance before use.
- You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.
|
|
|
Your Price: Email for price & lead time
|
|
|
|
|
|
|
|
|
|
Product Reviews
|
|
|