PCB with balance function for 6S (21.6V/22.2V) Li-Ion Battery Pack at 6A limit (#13046)

Protection Circuit Module Specifications  For 6S 21.6V/22.2V Li-ion/Li-po Battery  Pack
Model: PCM-LI6S6A
No.	Test   item		Criterion
1	Voltage	Charging voltage (P+ to P-)	DC: 25.2V CC/CV（4.2V/1cell）
		Input voltage for terminals (B1......B6)	5V
		Balance voltage for single cell	4.2±0.1V
2	Current	Balance current for single cell	42±5mA
		Current consumption for single cell (Operation)	≤20μA
		Maximal continuous Charging current	6A
		Maximal continuous discharging current	6A
3	Over charge Protection (single cell)	Over charge detection voltage	4.25±0.05V
		Over charge detection delay time	0.5S-1.5S
		Over charge release voltage	4.05±0.10V
4	Over discharge protection (single cell)	Over discharge detection voltage	2.50±0.1V
		Over discharge detection delay time	10-200mS
		Over discharge release voltage	2.50±0.1V
5	Over current protection	Over current detection voltage	0.15V±0.015V
		Over current detection current	10±2A
		Detection delay time	5ms-60ms
		Release condition	Cut load, auto recover
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	≤500us
		Release condition	Cut load, auto recover
7	Resistance	Protection  circuitry（Sum of B- TO P- and B+ to P+）	≤50mΩ
8	Temperature	Operating Temperature Range	-20～+85℃
		Storage Temperature Range	-40～+125℃
9	NTC		N/A
10	Battery packs in series		Not support
11	Battery packs in parallel		Not support
12	Weight		1 oz
13	Dimenstion	LxWxT	51x26x4 mm
14	Specification in pdf file	Download the specification

 For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

• If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch. 
• You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.