NiMH Rechargeable Battery: 24V 10 Ah (240Wh, 2x10S/S, MH-D50)

• 2 pc 65^o Thermostat in charging terminal to protect battery from overcharged
• 2 pcs temperature sensor (BEC male plug) installed at each 12.0V module 
  • Must connect temperature sensor (BEC male plug) between battery charger (temperature sensor (BEC male plug)) and battery pack before charging to protect battery from overcharging or explode.  We are not responsible for any damage caused by misuse.       

• Charging terminal:16AWG wire with mini Male Tamiya Connector
• Discharging terminal:14AWG wire with standard Male Tamiya Connector.
  • IncludedConnector Adapter: 2 to 1 Series Connection Tamiya Connector(1 Male + 2 Female inseries ) for discharge terminal
  • Must Disconnect 2 to 1 Series Connector adapter from discharge terminal before charge  

    13.5" (343mm)L x  3.28"(83.3mm)W x  2.5 "(64mm)H

• Please use smart charger to charge each 12V moduleseparately.
• Must connect temperature sensor (BEC male plug) between battery charger  (temperature sensor (BEC male plug)) and battery pack before charging to protect battery from overcharging or explode.
• Must Disconnect 2 to 1 Series Connector adapter from discharge terminal before charge   
• Please don't combine 2 pcs smart charger for charge the pack together at one time

• 24V 10000mAh NiMH Battery Pack for Electric Scooter and Any DC 24V devices.

• Please don't over discharge the NiMH battery pack below 1.0V / cell
• Please don't over-charging the battery beyond 30A, which may damage the battery permanently
• Charging battery from charging terminal only
• Charging battery pack after use for longer storage life
• Please see the link for more safety warning for NiMH battery