NiCd Battery Pack: 24V 7Ah (20xF, CD-F7000) Battery Pack

• 24V 7000mAh Battery Pack made by 20 pcs High quality F size NiCd Cells
• Packed in the configuration: 7+6+7  with Standard male Tamiya connector Heavy duty heat shrink wrapped
• 1 pc temperature sensor (BEC Female plug) installed at each 12.0V module 
  • Must connect temperature sensor(BEC Female plug)between battery charger (BEC male connector) and battery pack before charging to protect battery from overcharging or explode.  We are not responsible for any damage caused by mis use.  

•  24V ( working )    ( 29V at peak)

•  7000mAh  (168 wh)

•  1.5 A standard   3.5 A max.

•   5A Standard limited by 65^o Thermostat      

• Part Number: CD-20F7000S2P2-WR
• Battery pack only charge and discharge terminal with 6" 14 AWG Standard male Tamiya connector
• Part Number: CHUN-2420C03
  • Battery pack charge and discharge terminal with 6" 14 AWG Standard male Tamiya connector & Charger Combo
    
  • included One 24V Smart charger (2A)  with temperature sensor is included. (click underlined for detail specs)
    • Must connect temperature sensor (BEC Female plug) between battery charger (BEC male connector) and battery pack before charging to protect battery from overcharging or explode
    • 100-240Vac input for worldwide use.
    • Charging time is about 5.6 hrs.

• Part Number: CD-20F7000S2P2-WR-V1
• Battery pack only charge and discharge terminal are separately
• Charge terminal with 6" 14 AWG Standard male Tamiya connector
• Discharge terminal with 6" 14AWG open end wire
• Part Number: CD-20F7000S2P2-WR-V2
• Battery pack charge and discharge terminal are separately & 24V Smart charger (2A) charger combo
• Charge terminal with 6" 14 AWG Standard male Tamiya connector
• Discharge terminal with 6" 14AWG open end wire
• included One 24V Smart charger (2A)  with temperature sensor is included. (click underlined for detail specs)
  • Must connect temperature sensor (BEC Female plug) between battery charger (BEC male connector) and battery pack before charging to protect battery from overcharging or explode
  • 100-240Vac input for worldwide use.
  • Charging time is about 5.6 hrs.

• 9 .30" (235 mm) x  3.60" (92 mm) x  3.6" (92 mm)

• 8.3 lb (3.76kg)

• Ideal for replacing Lead acid batteries as back-up DC power with less weight, more power.

 Warnings

• Please don't over discharge the NiCd battery pack below 1.0V / cell
• Charge battery pack after use for longer storage life
• Must attach temperature sensor from the charger to battery pack before charging
• Please see the link for more safety warning for NiMH battery
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

• The temperature sensor (BEC male connector) included with the charger must be attached firmly to battery pack as shown