Li-Ion 18650 Battery: 3.6V 6.7Ah (24.12Wh, 2A rate, 2E/E, NCR18650B) - UN38.3 Passed / IEC62133: 2013 Listed

• 3.6V 6.7Ah Li-Ion Battery Module is built by 2 pcs Panasonic 18650 3350mAh Cells.
• The battery pack is wrapped by green PVC shrink tube
• With IEC62133 label

• 1x PCB(PCB-S1A2B) installed with the  battery pack and protects the battery from
  • Overcharge / Over discharge / Over drain / Short circuits
• 1x 2Amp Polyswitch
• 1x 10K thermistor (UL Listed : CH-103AT-4-70374)
• 1x Custom label with customer's logo

• 1.75" wire with PHR-3 JST (use machine crimping connector) 24Awg
• Pin 1: +
• Pin 2: Thermistor
• Pin 3: -

0.78" x 5.3" (21mmx135mm)

Battery will have at least 5200mAh after 500 cycles, if the charge and discharge current is less than 2000mA

• Charge: 0 to 45°C
• Discharge: -20 to 60°C
• Storage: -20 to 50°C

You can use our 1.8A faster smart  Li-Ion battery  charger to charge the battery pack  ( charging time is about  4 hours)

• Li-Ion battery may explode if misused.  We are not responsible for any damages or losses caused by misuse (including but not limited to: mis-charging, mis-discharging, any changes of this battery pack, disassembling batterypack).
• Always charge battery with attention.  Battery pack should be placed in a fireproof place to avoid any accidents.
• Please check battery polarity before plugging battery into light. Never make wrong polarity connection.  Please check
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
•