About Payment 
 Shipping & Cost
 FAQ's
 Warranty/Return
 Battery SDS
 Battery Terminology
 Testimonials
 Battery Knowledge
 
Privacy Policy
 Export restrictions

 

Customer Reviews

5 Star Excellence award from Shopper Approved for collecting at least 100 5 star reviews


Security Verified Seal
 

Hi-Power Polymer Li-Ion Pack: 7.4V 4000mAh 10C Discharge Rate (29.6Wh, w/o PCB)


Your Price: $52.95
In Stock

Product ID # 3153
Part Number:
PLH-6745135KS2WR

Quantity Discounts

QuantityAmount
5 to 19$51.36
20 to 49$50.30
50 to 99$49.24
100 or more$47.65

Features  

*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
Battery
Voltage       7.4 v (working)   8.4 V ( peak)    5.5 V ( cut-off)
Capacity       4 Ah   ( 29.6 wh)
Prewired
Max. Discharging Rate       40  Amp.  (Continuous 10 C rate)
Battery Dimensions(LxWxH)       142mm (5.5") x 46mm (1.8") x 12.35mm (0.5")
Battery Weight       192g (6.8 oz)  

Applications

  • The polymer battery is excellent for RC robot and other high drain DC device up to 40A
  • Superior Battery Power and Battery Strength makes your RC car or Aircraft a true champion
  • Can fit in most RC car stock tray ( 6x Sc size) and Replace 7.2V NiMH battery pack with 50% less weight
  • Can fit Losi XXX T- Novak Cyclone, Trinity Cobalt Pro stock, Spektrum DX3 radio w/ Z590 Hi-Torque Race Servo and SR3000 Receiver
  • Comparision with NiMH 7.2V 4.2Ah Pack
       Size (in)  Weight  Capacity Max Drain   Volt Flat  Cost  RC racing
     7.4V 4Ah Polymer  5.4x2x0.6" 190 g  3 wh  48A  7.2V  Higher  Faster
     7.2V 4Ah NiMH  5.4"x1.9"x1" 375 g   3 wh  40A  6.6V  lower  slower

Warnings

  • No PCB protection in ths Polymer Li-Ion Battery pack.  Please control discharging current and cut-off voltage
    • Never discharge battery beyond 50A
    • Never discharge battery below 4.0V
    • Recharge battery pack immediate after use
  • This Li-polymer battery pack has no PCB or PCM installed, must be charged by Intelligent Balance charger.  
  • Never discharge the battery pack below 5.0V(2.5V/cell).  
  • Always charging the battery immediately after use. We are not responsible for any damage caused by miss-use.
  • Please read more safety warning about Li-ion battery 

Related Products

Product Reviews

(1 Rating, 1 Review) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Akadius's test result
Anonymous (Unknown) 3/28/2007 3:18 PM
http://forums.batteryspace.com/forums/viewtopic.php?t=8869
---------------------------
What to consider when designing Lithium Batteries?
---------------------------
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
---------------------------
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
---------------------------
Lithium Battery Shipping Regulation
---------------------------
Recommendations on How to get ≤30% Rated Capacity for Shipping
---------------------------
Thermal Abuse Test for IEC62133
Mailing Lists