 |
 |

|
 |
|
|
Custom LFP 26650 Battery:12.8V 13.2Ah (168Wh, 16A rate, 26650-3300) with CMB, Cigarette Socket & 150W DC/AC Inverter in Enclosure (15.84)

Option 1: 150W DC/AC Inverter installed in the enclosure Option 1: 150W DC/AC Inverter installed in the enclosure Option 1: 150W DC/AC Inverter installed in the enclosure Option 2: 150W DC/AC Inverter on top of enclosure Option 2: 150W DC/AC Inverter on top of enclosure Option 2: 150W DC/AC Inverter on top of enclosure |
|
Lead Time: 5 Business Day
Product Options
DC/AC Inverter Position: |
|
|
Features
*Important Shipping Regulation |
This pack is for testing (prototype) only. It has not been UN38.3 tested yet. Read more... |
Packing |
|
Prewired |
Option 1:
- Output (Discharge terminal): 110VAC via 150W DC/AC Inverter located inside enclosure and one cigarette lighter socket for 12VDC located next to the AC output plug
- Input (Charge terminal): 5.5mm x 2.5mm female Barrel Socket
-
Option 2:
- Output (Discharge terminal): 110Vac via 150W DC/AC Inverter located on top of enclosure
- Input (Charge terminal): 5.5mm x 2.5mm female Barrel Socket
|
Protection |
- 1x CMB (16A limited) installed with the battery pack for perform smart charging and discharging protection
- 1x Fuel gauge installed : 4 LED built in the board to show battery charging/discharging status
- LED 1 (Right most LED) for indicate battery charging status
- LED 2 - LED4 indicate battery discharging status
- Included Press Fuel gauge switch to check the status of charge/discharge
- In order to save battery power, LED will remain "Off" except when activated by press switch with auto 2 second time out
|
Specification
CMB Function |
- Easy charging battery pack from any power DC source (DC 16.0V - 18.0V ( > 60W), 3.0A Max)
- The battery can be charged and discharged at the same time
- Note: If the discharge current is greater than charge current and CMB open to protect pack from over discharge. You need to unplug the charging adapter to "reset" CMB to start charging again.
- Smart Charging mode:
- CC (Constant Current) / CV (Constant Voltage) with cut-off input power when battery pack voltage reaches 14.6V
- Max charging current is 3.0A
- Note: Since the CMB installed inside battery pack will perform CC (Constant Current) / CV (Constant Voltage) charging, you don't need use our 12.8V LifePO4 Smart charger charge battery pack. Please use 16.0V- 18.0VDC ( > 60W), 3.0A Max DC power supply charge battery pack
- Discharging protection
- Overcharge (> 15.2V)
- Over discharge (<9.2 V)
- Over drain ( >16 Amp)
- Short circuits
|
Voltage |
- DC Input (Charging mode):
- Input power: DC 16.0V - 18.0V ( > 60W), 3.0A Max
- CC (Constant Current) / CV (Constant Voltage) with cut-off input power when battery pack voltage reaches 14.6V
- CC/CV, CC = 3.0A, CV = 3.65V Max per cell
- Note: this is the only port to charge this pack!
- AC Output via Inverter (Discharging mode)
- Voltage: 110Vac (300W peak 150W continuous)
- 12Vdc Output via cigarette socket max upto 16A
- Note - output only cannot use to charge this battery pack
|
Capacity |
13.2 Ah (168.96 Wh) |
Cycle life |
> 1000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) |
Charging rate |
3.0 A Max limited by CMB (16A limited) |
Max. Discharging Rate |
16.0A Max limited by CMB (16A limited) |
Dimensions(LxWxH) |
- Option 1: 315mm(12.4")x 140mm(5.5") x 67mm(2.6")
- Option 2: 184mm(7.2")x 125mm(4.9") x 112mm(4.4") (include dc/ac inverter on top of enclosure)
|
Weight |
- Option 1: 2340 grams (5.0lbs 2.4Oz)
- Option 2: 2170 grams (4.0lbs 12.4Oz)
|
Warnings
- 12.8V LiFePO4 battery pack shall be cut-off at 9.2 V during charging and 15.2V during discharging
- Must charge the pack by DC charge method via only charging terminal.
- Since the battery pack have a CMB installed to perform a smart charging, Please DO NOT use any 12.8V LiFePO4 smart charger for charging battery pack
- Please click Knowledge on LiFePO4 battery to learn more details
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
Related Products
- Please choose our smart chargers:
- Note: Since the CMB installed inside battery pack will perform CC (Constant Current) / CV (Constant Voltage) charging, you don't need use our 12.8V LifePO4 Smart charger charge battery pack. Please choose above recommended DC power supply to charge battery pack
- Need 5.5mm x 2.5mmx 12mm male barrel plug? please order here
- Need Components to DIY? Please order here.
|
|
|
|
|
Your Price: From $222.50 to $230.00
|
Your Price: From $204.95 to $214.95
|
Your Price: From $285.95 to $307.95
|
|
Your Price: From $185.00 to $200.00
|
|
|
| |
Product Reviews
|
|
|