Custom Polymer Li-ion Battery: 3.7V 10Ah (37Wh, 3.5A rate, 9059156-1C) - UN38.3 Passed

• Custom 3.7V 10Ah Li-Ion Battery pack is made of 1 x 3.7V 10A (PL-9059156)
  
  Label must place as product picture

• 1x PCB (5A) installed with the battery pack to protect the battery from
  • Overcharge / Over discharge / Over drain / Short circuits
• 1 x 4A Polyswitch

• PR-CU-R530: 4" 24 AWG wire with JST PHR-3 connector, 1" shrink tubing put on.

• Pin 1 = Negative (Black)
• Pin 2 = NTC (White)
• Pin 3 = Postive (Red)
• 

• You can use our 3.0A 3.7V LI-ion Charger to recharge the battery pack. Charge time is about 4 hours

• Li-Ion battery may explode if misused. We are not responsible for any damages or losses caused by misuse (including but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling battery packs).
• Always charge battery with attention. Battery pack should be placed in a fireproof place to avoid any accidents.
• For safety warning please see the link here
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
•