Custom Polymer Li-Ion Battery: 11.1V 3.2Ah (35.52wh, 655585-2C) w/ thermistor

• 11.1V, 3200mah battery pack made of 3 pcs PL-655585-2C Li-Ion cells in series
• PVC shrink wrapped (thin sheet)

      working voltage: 11.1V  Peak voltage: 12.6V Cutoff voltage: 9V  

• 1x PCB (7A) install on back side of pack to protect battery from
  • Over-charge  / Over-discharge  / Short circuit   
• 1x 7A polyswitch to limit current to 7A and wrong polarity
• 1x 10k Thermistor

• 6" 22 AWG wire for charging and discharging
• 1x 10k Thermistor with 6" wire (white color wire)
• Note: all wiring & thermister will be located at side of pack.

Max Discharge Rate

• 6400mA limited by cell

• 92.08mm x 60.33mm x 19.50mm (3.625" x 2.375" x 0.77")

• 255 gram (9.0 oz)

• You shall choose our 1.5A smart Li-Ion pack charger to recharge the battery pack.
• The charging time is about 4 hours.
• Perfect for DIY by our connector/wire section.

• Li-Ion Batteries may explode if charged or discharged improperly.
• The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs
• We must use a protection IC  ( PCB) to keep the battery and its pack from over charging and over discharging.
• Please read more safety warning about Li-ion battery
• California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
•