Custom NiMH Rechargeable Battery: 12V 10Ah (120Wh, 2x5S/S, MH-D50) with 30A Anderson Connector

• Custom 12V 10Ah NiMH Battery Pack made by 10 pcs NiMH D size cells, assembled side by side in two rows ( 5x2) "offset" configuration
• Wrapped by heavy duty heat shrink tube
  • add water proof rubber coating on whole pack then use heavy duty shrink wrap on outside

• Standard rate: 10Amp  ( Recommended and warranted)
• Highest rate for continuous running:  20Amp   
• Max. Rate for short time: 50Amp ( Not recommend as working rate )

 Thermostat (7aM0345A5) provide by customer for initial order. Cover with Shrink tube

• Discharging/Charge Terminal: 6.0" 16AWG with Anderson Connector (1395 series)
  
  • Red = Positive (+)
  • Black = Negative (-)
• Thermistor  (10K 103JG1H) : 6.0" 20AWG Anderson Connector (1395 series)
  • White - blue wire
  • Yellow = blue wire

• Please don't discharging the battery pack below 10V  ( 1.0 V / cell).  Deep discharging may damage NiMH battery pack. 
• Charging battery immediately every time it is discharged. Never storage the battery pack at below 10V. 
• Please don't use charger terminal to discharge battery
•