About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Custom LFP 26650 Battery:12.8V 13.2Ah (168.96Wh, 16A rate) with CMB & Flush Mount Cigarette Socket (15.84)

Your Price: $341.50
Special Parts Required, Call to Order.

Product ID # 5614
Part Number:

Lead Time: 5 Business Days


*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
  • Output/Discharging Terminal: 10.0" 16AWG to Flush Mount Cigarette lighter socket & hard wire to CMB board
  • Input/Charging Terminal: 10.0" 20AWG to Flush Mount Cigarette lighter socket & hard wire to CMB board
  • 1x CMB (16A limited) installed with the  battery pack for perform smart charging and discharging protection
    • Smart Charging mode
      • CC (Constant Current) / CV (Constant Voltage) with cut-off input power when battery pack voltage reaches 14.6V
      • Max charging current is 3.0A
    • Discharging protection
      • Overcharge (> 15.2V)
      • Over discharge  (<9.2 V)
      • Over drain ( >16 Amp)
      • Short circuits
  • 1x Fuel gauge:  4 LED built in the board  to show battery charging/discharging status
    • LED 1 (RIght most LED) for indicate battery charging status
    • LED 2 - LED4 indicate battery discharging status
    • Included Press Fuel gauge switch to check the status of charge/discharge
    • In order to save battery power, LED will remain "Off" except when activated by press switch with auto 2 second time out
  • DC Input (Charging mode):
    • Input power: DC 16.0V - 18.0V  ( > 60W), 3.0A Max
    • CC (Constant Current) / CV (Constant Voltage) with cut-off input power when battery pack voltage reaches 14.6V
      • CC/CV, CC = 3.0A, CV = 3.65V Max per cell
  • DC Output (Discharging mode)
    • Voltage: 12.8 V (working)  15.2 V (peak)  10.0 V ( cut-off)  
Capacity 13.2 Ah  (169 Wh)
Cycle life > 1000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) 
Charging rate 3.0 A Max  limited by CMB (3A limited)
Max. Discharging Rate 16.0A Max limited by CMB (16A limited)
Dimensions(LxWxH) 184mm(7.2")x 125mm(4.9") x 67mm(2.6")      
Weight 2000grams (4.0 lbs 6.6 Oz) 


  • Replace 12V NiMH or Lead acid battery pack with longer cycle life
  • External battery pack to run 12V DC devices with 16A Max current drawn, such as videolights up to 60W , electric scooter, e-bike  etc  
    • You may calculate burn time by 168.96Wh / the wattage of device


  • 12.8V LiFePO4 battery pack shall be cut-off at 9.2 V during charging and 15.2V during discharging
  • Must charge the pack by DC charge method via only charging terminal.
  • Since the battery pack have a CMB installed to perform a smart charging, Please don't use any 12.8V LiFePO4 smart charger for charge battery pack
  • Please click Knowledge on LiFePO4 battery to learn more detail

Related Products

  • Need 5.5mm x 2.5mm x 12mm male barrel plug?  please order here.
  • Smart Charger: Please choose our 16-18V <3A dc adapter with cigarette lighter connector or connect directly to a 12V solar panel
    • Note: Since the CMB installed inside battery pack will peform CC (Constant Current) / CV (Constant Voltage) charging, you don't need use our 12.8V LifePO4 Smart charger charge battery pack. Please use above recommended DC power supply charge battery pack 

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists