About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Battery holder: Li-Ion 18650 Battery Holder (3S1P) with PCB (3S1P-18650) (#5602)

Your Price: $14.95
In Stock

Product ID # 5602
Part Number:

Quantity Discounts

5 to 20$14.50
21 to 50$14.20
51 to 100$13.90
101 or more$13.45
  • 18650 battery holder with PCB module designed for making 11.1V Li-Ion 18650 battery pack in  3 series 1 Parallel configuration with 4.0A rate  limited by PCB installed
    • Battery pack watt-hour = 11.1V x cell capacity
  • Each holder is design to hold 3  x standard (Flat top) 18650 cell  (Do NOT use button top cell)!

  • PCB (4.0A limited, Manufacture part# PCM-L03S07-380) installed on front surface for protect the battery from
    • Overcharge (>12.6V)
    • Over discharge ( <7.5 V)
    • Over drain ( >4.0 Amp)
    • Short circuits
Optional for Li-Ion cell (Flat top only)
  • Polypropylene 
  • Black
Size  (LxWxH)
  • 80mm(3.14") x 63mm(2.5") x 18.6mm(0.7")
  • 0.8 Oz (20 grams)
  • Storage temperature: 25'C (77F, Room Temperature)
  • Max Operate temperature: 80'C (176F)
  • This battery holder is designed for standard 18650 (flat top) battery only!
  • Please don't remove PCB installed on battery holder.
  • This battery holder is for only 3S1P battery pack. Please don't combine battery holder for any series / parallel connection.
  • After insert battery(ies), must connect to charger to enable the pcb. Otherwise, you will get "no" output from pcb! 
  • Li-Ion battery may be exploded if misuse.  We are not responsible for any damages or losses caused by misusing
  • Always charge battery with attention.  Battery pack shall be placed on a fire-proof place to avoid any accident
  • Please check battery polarity before plug battery into device. Never make wrong polarity connection.  
  • For safety warning please see the link here
  • Must use our 11.1V smart charger below for recharge battery pack

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists