About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Battery Analyzer / Cycler: 8 Channels (30V10A/channel) + Laptop for all type of Rechargeable Batteries

Your Price: RFQ
Email for Lead Time

Product ID # 7263
Part Number:

BT8-30V10A-N is a CE certified 8 channel battery analyzing system for Li-ion, LiFePO4, Ni-MH, Ni-Cd, and Lead acid battery packs with up to 30V and 10A per channel. This battery analyzer is designed according to the international standard: each channel has an independent constant-current source and a hardware constant-voltage source. Constant-current source and constant-voltage source can be programmed and controlled by user. With plug-and-play module design, user can freely remove and add module units without interrupting other units.

Input AC AC 220V ± 10% / 50Hz
Input Power 3241W
Resolution AD: 16bit; DA: 16bit
Input impendence


Voltage Measuring Range Charge: 0.15-30V; Discharge: 0.15-30V
Min discharge voltage 3.0V
Accuracy ± 0.1% of  FS
Stability ± 0.1% of  FS
Current Output range/channel 0.05A-10A
Accuracy ± 0.1% of FS
Stability ± 0.1% of FS
Power Output power/channel 300W
Stability ± 0.2% of FS
Time Rise Time 1ms (0- Full Range)
Step time ≤(365x24)h/step, Time format-00 : 00 : 00 : 000(h, m, s, ms)
Data Acquisition Intervals

Tim interval △t: 100ms - 60000s
Voltage interval △U: 60mV-30V
Current interval △I:20mA-10A

Frequency 10Hz
Charge Mode of Operation CCC, CVC, CC &CVC, CPC
End Conditions Voltage, Current, Time, Capacity
Discharge Mode of Operation CCD, CPD, CRD
End Conditions Voltage, Current, Time, Capacity
Pulse Charge CC, CP,
Discharge CC, CP,
Min pulse width 500ms
Automated Switch Automated switch from charge to discharge for each pulse
End Conditio Voltage, Relative Time
DCIR Support for the calculation of the point of the DCIR
Cycle Max cycles 65535
Max steps 254
Nested Functio Max three levels of loops
Protection Software Power-off data protection
Off-line operation mode
User-defined safety(upper and lower)tolerance of current, voltage and delay time
Channels feature Independent pairs of closed loop for constant current source and constant voltage source
Channels Independent control
Detection and Sampling 4-wire Connecting
Noise <85dB
Database MySQL
Communication TCP/IP
Operating system Windows 7/8/10 64 bit
Data export EXCEL, TXT, Graph
Disk drive Suggest to use laptop with minimum 500GB
Communication port Ethernet port
Number of Channels Per Cabinet 8
Channels per unit
  • Eight independent programmable channels
  • Each channel can set different working modes and functions independently
Operation and storage environment requirement
Operation environment temperature 0°C- 40°C
Storage environment temperature -10°C-50°C
Operation environment humidity ≤70% RH
Storage environment humidity ≤80% RH
Dimensions (WxDxH) 18U  600x600x10000mm; 24x24x40 inches
Program & Software
  • The software with calibration function is included to set various working modes for measuring capacity and life cycle for all types of rechargeable batteries
  • With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently
  • During the test, the software will provide instructions and warnings for assistance
  • The calibration software can be used to calibrate the analyzer
Test Reports and Curves for analysis
  • Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times-charge/discharge capacity curve, loops times-charge/ discharge efficiency curve, etc)
  • Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically
  • If power failure occurs during testing, the system will shutdown all operating channels.
Battery Holders Two types of battery holders are included in the standard package:  
  • 8 alligator clips with cable for universal connecting
  • 8 spring load holders with adjustable length for measuring cylinder battery upto 70mm(H)
Laptop Computer
  • Brand new laptop (8GB, 512GB SSD) with MS Window 10, MS Excel 2013 30 days free trial is included and latest version testing software are installed and calibrated for immediate use
  • Upto 20 sets of analyzers can be simultaneously controlled by one PC
  • Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data.
Warranty One Year limited warranty with lifetime support. (Notes: We do not offer warranty for the laptops. Please contact laptop manufacturer for related issues.)
Application Notes
  • New buyers must buy one software-installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop.
  • Customer can easily combine up to 20 battery analyzers by using normal Ethernet cable connector via one computer. 
  • Warning: Please choose 'NEVER' for Screen and Sleep off in Power& Sleep setting of your computer, or it may lose connection from battery analyzer.
  • You may order movable rack to organize the battery analyzers with extra cost
Net Weight 90 kg (200 lbs)
Shipping Weight 115 kg (250 lbs)
Need to ship as small pallet: LxW: 36"x30". Please email for shipping cost.
Shipping Dimensions 34x34x55 inches
Picture Picture for reference only
Compliance CE Certified

Standard package:

Item Description Qty
1 Battery analyzer + Brand new laptop with MS Window 10 system and battery analyzer operation software installed 1
2 Analyzer Software 1
3 mid-machine and cable line fo connecting the computer 1
4 Alligator Clips for connecting battery 8

Item Description
Computer If you already have at least 1 unit BT8-30V10A-N

Custom cable or Coin Cell Testing Board are available with extra cost

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists