 |
 |
|
 |
|
|
Home
Battery Analyzer / Cycler: 8 Channels (0.5-6000 mA, up to 5V) for Cylinder / Pouch cells
|
|
Email for Shipping Cost
Product ID # 3208
Part Number: BA8-5V6000MA
Lead Time: To be advised
Personalizations
* denotes required field
Laptop Computer (a must for the first time buyer)*
|
BA8-5V6000MA is an eight-channel battery analyzer to analyze cylindrical and pouch batteries, output range from 0.5 mA to 6000 mA, up to 5V. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software. This system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc. Specification:
Control Unit:
| Control Unit |
- AC 220V (for 110V input, you will need 1000W inverter, which is not included)
- This picture below shows 1 control unit and 1 analyzer
|
Analyzer:
| Input AC |
AC 220V |
| Input Power |
425W |
| Resolution |
AD: 16bit; DA: 16bit |
| Input impendence |
≥1MΩ
|
| Voltage |
CV output range |
25mV - 5V |
| Min discharge voltage |
1.0V for universial holder,1.5V for 2m cable |
| Accuracy |
± 0.05% of FS |
| Stability |
± 0.05% of FS |
| Current |
Output range/channel |
Dual range. Range1: 0.5mA-100mA; Range2: 100mA-6A |
| Accuracy |
± 0.05% of FS |
| CV cut-off current |
Range1: 0.2mA; Range2: 12mA |
| Stability |
± 0.05% of FS |
| Power |
Output power/channel |
30W |
| Stability |
± 0.1% of FS |
| Time |
Current response time |
Max rising time:1ms |
| Working step time |
≤(365x24)h/step Time format-00 : 00 : 00 : 000 (h, m, s, ms) |
| Data record |
Data record conditions |
Min data record interval : 100ms
Min voltage change: 10mV
Min current change: Range1: 0.2mA; Range2: 12mA
|
| Frequency |
10Hz |
| Charge |
Charge modes |
CC, CV, CCCV, CP |
| Cut-off condition |
Voltage, Current, Time, Capacity, -△V |
| Discharge |
Discharge modes |
CC, CP, CR, CV |
| Cut-off condition |
Voltage, Current, Time, Capacity, -△V |
| Pulse |
Charge |
CC, CP, |
| Discharge |
CC, CP, |
| Min pulse width |
500ms |
| Pulse counts |
Up to 32 |
| Chg and Dischg switch |
Supported |
| Cut-off condition |
Voltage, Time |
| DCIR |
Supported |
| Cycle |
Max cycles |
65535 |
| Max steps |
254 |
| Cycle nest |
3 |
| Protection |
Safety protection |
Power-off data protection |
| Off-line operation mode |
User-defined protection conditions, such as upper and lower
limited current/voltage, delay time, temperature, etc. |
| Channels feature |
Independent pairs of closed loop for constant |
| Channels control mode |
Independent control |
| Data acquisition method |
Kelvin connection |
| Noise |
<85dB |
| Database |
MySQL |
| Communication |
TCP/IP |
| Operating system |
Windows 7/8/10 64 bit |
| Data export |
EXCEL, TXT, CSV, PDF, Plot/Graph |
| Disk drive |
Suggest to use laptop with minimum 500GB |
| Communication port |
Ethernet port |
| Leak Current |
0.0000005mA |
| Channels per unit |
- Eight independent programmable channels
- Each channel can set different working modes and functions independently
|
| Operation and storage environment requirement |
| Operation environment temperature |
0°C- 40°C (When the temperature is 25±10°C, the accuracy error caused by temperature change is less than 50ppm /°C) |
| Storage environment temperature |
-10°C~50°C |
| Operation environment humidity |
≤70% RH(no moisture condensation) |
| Storage environment humidity |
≤80% RH(no moisture condensation) |
| Dimensions (WxDxH) (mm) |
480x380x130 |
| Program & Software |
- The software with calibration function is included to set various working modes for measuring capacity and life cycle for all types of rechargeable batteries
- With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently
- During the test, the software will provide instructions and warnings for assistance
- The calibration software can be used to calibrate the analyzer
|
| Test Reports and Curves for analysis |
- Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times-charge/discharge capacity curve, loops times-charge/ discharge efficiency curve, etc)
- Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically
|
| Protection |
- If power failure occurs during testing, the system will shutdown all operating channels.
|
| Battery Holders |
Two types of battery holders are included in the standard package:
- 8 alligator clips with cable for universal connecting
- 8 spring load holders with adjustable length for measuring cylinder battery upto 70mm(H)
|
| Compliance |
CE Certified |
| Warranty |
One Year limited warranty with lifetime support. (Notes: We do not offer warranty for the laptops. Please contact laptop manufacturer for related issues.) |
| Net Weight |
11.5 kg (26 lbs) |
| Shipping Weight |
18 kg (40 lbs)
Need to ship as small pallet: LxW: 36"x30". Please email for shipping cost. |
| Shipping Dimensions |
610mm(H) x 510mm(W) x 356mm(H) (24" x 20" x 14") |
| Video |
|
Computer:
| Laptop Computer |
- Brand new laptop with MS Window 10, MS Excel 2013 30 days free trial is included and latest version testing software are installed and calibrated for immediate use
- Computer Minimum requirement: Dual Core system, Processor Speed: ≥2G, ≥ RAM: 5G, Hard drive: ≥200G, NTFS, 64bit，Ethernet ports.
- Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data.
- New buyers must buy one software-installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop.
- Customer can easily combine up to 10 battery analyzers by using normal Ethernet cable connector via one computer.
- Warning: Please choose 'NEVER' for Screen and Sleep off in Power& Sleep setting of your computer, or it may lose connection from battery analyzer.
|
Standard package:
| Item |
Description |
Qty |
| 1 |
Battery analyzer |
1 |
| 2 |
Brand new laptop with MS Window 10 system and battery analyzer operation software installed+ Analyzer Software |
1 |
| 3 |
Control Unit and cable lines fo connecting the computer |
1 |
| 4 |
Alligator Clips for connecting battery  |
8 |
Optional:
| Item |
Description |
| Computer |
If you already have at least 1 unit BA8-5V6000MA |
| Control Unit |
If you already have at least 1 unit BA8-5V6000MA |
| Movable Rack |
You may order movable rack to organize the battery analyzers with extra cost |
Customization:Custom cable or Coin Cell Testing Board are available with extra cost
|
Your Price: From $17.00 to $25.00
|
Your Price: From $129.00 to $199.00
|
|
|
|
|
Your Price: From $219.95 to $339.90
|
|
| | |
Product Reviews
|
|
|