|
|
|
 |
|
|
36V to 48V NiMh/NiCD Smart Charger (2.0A) with 3 pins Plug
|
|
In Stock
Product ID # 8399
Part Number: CH-UN4820B
|
Features:
| Manufacture part# |
SPS-N40S02-162 |
| Product |
Multi-current Universal Fast and Smart Charger for any NiMh / NiCd battery packs from 36V-48V (30-40 cell pack) |
| Input |
AC 100-240V 50-60Hz worldwide power support |
| Output |
DC 64V |
| Charging Current |
2000mA |
| Connector |
|
| Efficiency |
> 80% |
| Operate Temperature |
-10 oC to + 40 oC |
| Dimension(LxWxH) |
180mm(7.1") x 90mm(3.5") x 50mm(1.9") |
| Weight |
27oz (764grams) |
| Specification |
Please download specification |
Functions
- Stabilized output, low ripple
- Built in cooling fan to ensure charger long service life
- 8-hour safety timer, charger will stop charging after operates 8 hours
- Automatically cut-off by negative delta V detecting or when battery's temperature is over 60 oC
- Protection: Output Short circuit protection, Output Polarity reverse protection.
- LED indicator
- Red LED: Charging
- Green LED: fully charged
- Red Flashing: recognizes battery as damaged or voltage is below 20V
- LED will be off if short circuit or polarity is reversed.
- Note: when first connect AC power (turn on power) wink red/green twice then off - charger passed self test!
|
Operation Instruction
- Connect AC power to charger. Turn power switch to "on" position (LED will wink red/green twice)
- Connect battery pack's charging terminal to charger
- Make sure battery polarity is connected correctly (Red wire is positive)
- Attach temperature sensor to battery pack firmly or the BEC connector from the battery pack if available
- When charger connectos to the AC source, red LED will flash for 2 times and green LED
- After battery is fully charged, green LED will be on and it shows the battery fully charged.
|
Warnings
- Use with NiMH pack 36 to-48V pack only
- Indoor user only,
- Don't open the cover due to dangerous hi-voltage inside
- Don't place the charger near radiator, heat source device
- Please don't use the charger for low capacity battery pack (<4000mah).. strongly suggest use Powerizer brand high drain rate battery pack. We are not responsible for any damage caused by charging other brand battery using this charger.
- Please plug in AC power first, then connect the battery to the charger, otherwise, there is no output from the charger.
- For the 36V/48V NiMH made by 3 or 4 series 12V NiMH module, Must disconnect discharge terminal separately before charge.
- For the parallel pack of 36V/48V NiMH pack, Must disconnect discharge terminal separately before charge & Must charge each module separately (Don't combine charge at a time)
- California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings
|
|
Your Price: From $29.84 to $40.25
|
Your Price: From $23.95 to $33.95
|
Your Price: From $34.20 to $45.80
|
Your Price: From $19.95 to $24.95
|
|
|
Your Price: From $26.75 to $31.75
|
|
Your Price: From $34.70 to $106.89
|
|
|
Your Price: From $22.94 to $25.24
|
Your Price: From $22.94 to $32.14
|
Your Price: From $51.69 to $65.55
|
Your Price: From $103.44 to $131.04
|
|
|
|
| |
Product Reviews
|
|
|