Universal Smart Charger (1.5A) for 19.2 - 24V NiMH / NiCd Battery Pack with Two Pin connector

Features:

• Specially design for  19.2V-24V NiMH / NiCd battery pack with capacity > 1.5Ah for super-fast charge and safety use.
• Input: AC 100V-240V worldwide AC Power support.
• Output: 2 Amp constant charging current for a faster charge. 
• Built in IC for auto-cut off power by -delta V (30mV/Cell) when the battery pack is fully charge.
• Built in IC detects battery voltage between 19.2V and 24V to adjust charging voltage automatically.
• 3 feet long combine cable with a female Standard Tamiya charging connector and a BEC male temperature sensor connector.
• A temperature sensor connector is included to cut off power when battery pack temperature is > 40 Deg C.
• Charging time: depends on the battery pack capacity (mAh).
  For 3 Ah battery pack,  charging time is about 2.5 hrs.
  For 13Ah battery pack, charging time is about 10 hrs.
• CE approved
•  Please click here to download specification

Dimensions: 6"L x 2.7"W x 2"H

Weight:        0.92 Lb  (14.7oz)

Warning: 

•   You must attach the temperature sensor to battery pack during charger to avoid over-charge or explode!

• Don't use the charger to charge a battery pack capacity < 3000mAh's or voltage < 19.2V or voltage > 24V

• You must attach temperature sensor (thermo-sensor) to battery pack as shown in picture below

• NOTICE: Any changes made to our battery and charger will VOID warranty.