Solar / DC Charge Controller (60A Rate) for 12V/24V SLA / LFP Battery with LCD Display

EPIP60 solar charger /DC controller is designed for larger solar power station (> 720W ) or a  high current faster DC charger for 12V /24V SLA and LFP batteries up to60A.

• Automatically detect/select voltage of solar panel and battery, and can be used for both 12V and 24V solar power system or used as DC charger for 12V and 24V  SLA and LFP battery pack for high current up to 60A
• Automatically cut-off power when 12V/24V SLA/LFP battery is fully charged
• Protect battery from overcharged and over-discharged to increase battery service life
• Protect battery over-drained upto 60Amp rate
• LCD digital display shows state of charger (SOC) as a fuel gauge, all system parameters in digital value and system status as symbols
• Built in full protection for short circuit and wrong polarity connection 
• Automatic load reconnection, manual load switch
• Temperature compensation automatically during charging
• Easy to install, see picture below:
•  Please click here to download the specifications and Installation manual 

Smart Tips: ( click underlined to link) Connect a DC Power supply or DC alternator ( 12V - 17V ), it can used as  smart DC charger for 12V Lead acid battery and 12.8V LFP battery pack with capacity from 40Ah - 200 Ah Connect with smart DC-AC inverter  for 110VAC and 5V DC output to run any electronic device up to 120W You may choose 110V Super LED bulb or 12V LED bulb as lighting to save energy You may choose DC-DC regulator to run laptop computer

Specifications

• Solar Panel Require:           12-17V for 12V battery and , 24-30V for 24V battery
• Battery Require:                Battery Capacity shall > 40Ah.
• Max. working current:         60Amp
• Terminal:                           For wire size to 6mm 
• Overload protection:           >65 A for 5 sec. and 100A if short circuit
• Self Discharge rate:            <= 6 mA
• Charging voltage drop:        <0.26V
• Discharging voltage drop:    < 0.15V
• Regulated Output:              14.4V for 12V SLA, 28.8V for 24V SLA
• Low battery protection:        <11.1V
• Smart charging:                 4 stages: Bulk, PWM, Boost and Float
• Dimension (LxWxH):           189 mm x 159 mm x 52 mm
• Weight:                              
• Working temperature:         -35^oC - +55^oC
• Enclosure:                          IP22 water proof, ABS materials
• Compliance:                       CE approval
• Warranty:                           One year