Smart Charger (6 A) for 51.8V (14 cells) Li-Ion Battery Pack (110V, Standard Female Tamiya Plug)

The Smart Charger is designed for charging 6Ah - 40Ah 51.8V ( 14 cells ) Li-Ion battery pack with PCM. It features with three stages charging (Constant Current,Constant Voltage & Trickle charge mode) and promise 51.8V Li-Ion battery to get fully charged without overcharged. 

• INPUT
  • AC input voltage 99 to 121 VAC , single phase (USA use only)
  • Input frequency 45 to 63 Hz
  • Efficiency 72%(min)at rating power,115Vac 60Hz
• OUTPUT
  • CCCV (Constant Current Constant Voltage) charging mode
  • Cut-off voltage: 58.2VDC
  • 6 A current Max.

  • Charge terminal: 14AWG wire Standard female Tamiya plug.

    • Do not detach Standard female Tamiya plug from charger

  • Included one pcs connector adaptor, convert from Standard Male Tamiya plug to alligator Clip

    • Must plug Standard Male Tamiya end to the Standard Female Tamiya plug of the charger with correct polarity.
    • Must plug Clip end to the connector of the battery pack with correct polarity
      • Red Clip = Positives
      • Black Clip = Negative
    • Warning:  Wrong polarity will damage the charger, and Batteryspace are not responsible for the damage or losses caused by misusing
  • Optional for Connector/Adaptor: From Stand Tamiya Male to 5.5 mm x 2.1 mm Barrel Male. Please click here to order seperately
• CHARGE
  • The Battery range is between 6A to 40AH
  • No trigger voltage requirement
  • Reverse Polarity Protection
  • Short Circuit Protection
• Built in cooling fan to ensure charger long service life
• 6 LED indicator installed to indicate "Initial", "Ready to charge/ Wrong polarity connection", "Perform Charging/ Correct Polarity connection / 20% - 100% Fully Charge" status
  • Initial: All 6 LED indicator "Flashing" for 5 sec
    
  • Ready to charge/ Wrong polarity connection: 1st green LED = Solid green, Red LED = "Flashing Red"
  • Perform Charging/ Correct Polarity connection: 1st green LED = "Flashing Green", Red LED = "Off" (Cooling Fan turn on)
    
    • 20% full charge: 1st green LED = "Solid Green", 2nd green LED = "Flashing Green", Fault Indication LED = "Off"
    • 40% full charge: 1st & 2nd green LED = "Solid Green",  3rd green LED = "Flashing Green", Fault Indication LED = "Off"
    • 60% full charge: 1st  & 2nd & 3rd green LED = "Solid Green" , 4th green LED = "Flashing Green", Fault Indication LED = "Off"
    • 80% full charge: 1st & 2nd & 3rd  & 4th green LED = "Solid Green", 5th green LED = "Flashing Green", Fault Indication LED = "Off"
    • 100% full charge: 1st & 2nd & 3rd & 4th &5th green LED = "Solid Green",Fault Indication LED = "Off"
• Included 1 pcs replacement 8A 250V fuse
• Dimension (LxWxH):  210mm(8.3")x 140mm(5.5") x 72mm(2.8")
• Weight: 4.9lb (2222 grams)
•  Please click here to download user manual

Warning:

• Charge Li-Ion rechargeable pack for 51.8V only
• Do not detach Standard female Tamiya plug from charger
• Do not expose the product to rain or humidity to prevent from electric shock
• It is normal if the product gets slightly hot in using
• Keep the product out of the reach of children
• A quality and correct polyswitch must be installed to battery pack to avoid accident.
• Do not open the charger and touch any part of the product to prevent from electric shock
• We are not responsible for any damage caused by misuse.