SLA Battery:Regulated Sealed Lead Acid Battery 12V 12Ah with Overcharge and Overdischarge Protection

Batteryspace created a Smart regulated Lead Acid battery, combined the Lead Acid battery along with DC voltage controller to protect battery from over-charged & over-discharged and give you a regulated 12Vdc source!

Feature:

• 1 x 12V 12Ah Lead Acid Battery with DC Voltage Controller (120W ) for Solar Panel
  • Please download the specifications for Lead acid battery 12.0 v 12 Ah.
  • Need additional 12V 12Ah Lead Acid Battery?Please click here to order.

• SR-L2410A DC voltage controller is installed on top of the battery

   

  • Connect a 15V 2A AC-DC adaptor or  12C solar panel  to the controller,  power can be cut-off power when 12V SLA battery is full
  • Protect battery from overcharged and over-discharged to increase battery service life
  • LED display battery storage level
  • Built in fuse to protect short circuit and wrong polarity connection 
  • Moisture proof design for outdoor use 
  • Stable 12VDC output without influence of battery voltage change
  • Included 3 terminals
    • DC input port ( 2 left-most terminal)
    • Optional: 12V SLA battery port (Use to charge additional battery (2 middle port).
    • 12VDC output port. (2 right-most port)
• Easy to install, see picture below:
• Download user manual
• Smart Battery's Dimension (LxWxH): 156mm (6.1") x 100mm (3.9") x 128mm (5.0")
   

Smart Tips: ( click underlined to link) Please click to order solar power panels and 12V sealed lead acid battery Connect a 15V (>=2Amp) AC-DC adaptor to controller, you can use it as a smart charger for 12V Lead acid battery Connect with smart DC-AC inverter  for 110VAC and 5V DC output to run any electronic device up to 120W You may choose 110V Super LED bulb or 12V LED bulb as lighting to save energy You may choose DC-DC regulator to run laptop compute

Charger Controller's Specifications

• Solar Panel Require:           12-17V  < 170W
• Battery Require:                12V/24V SLA, 12.8V/25.6V LiFePO4 battery > 7Ah
• Output Voltage:                 12V/24V DC (same as battery voltage) 
• Max. working current:         10Amp
• Overload protection:           >15A for 5 sec. and 30A if short circuit
• Self Discharge rate:            <= 6 mA
• Charging voltage drop:       <0.26V
• Discharging voltage drop:    < 0.15V
• Over-voltage protection:      17V/ 34V
  
• Low battery protection:        <11.1V / <22.2V
  
• Smart charging:                  Three stages floating mode
• Max Dimension (LxWxH):    140mm (5.5") x 91mm (3.6") x 27mm (1.1")  
• Weight:                              250 grams (9.0Oz) 
• Working temperature:          -25^oC - +55^oC
• Enclosure:                           PI22 water proof, ABS materials
• Warranty:                            Two years