Polymer Li-Ion Battery Module: 37V 10Ah ( 370 Wh) 14A Drain Rate + A Fire Retardant Bag (30.0)

• 37V 10Ah pack is made by 10 pcs high quality Polymer Li-Ion cell of 3.7V 10000mAh batteries  
• The state art of PCM is installed the pack to protect battery from over-charged, over-discharged and over-drained
• Wrapped by heavy-duty Heat shrink tube
• Included 1 pcA Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
  • This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
  • Must locate & seal the battery pack in the bag  while charging / leaving without any attention

How to charge the pack by excluded3.0A charger. 

• One PCM with balance function is installed in the battery pack to balance charging and protect battery module from
  • Over discharge beyond 42V
  • Over discharge below 28V
  • Over drained beyond 15A
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Two 7 Amp  poly-switch installed in the pack to limit  max. discharging current to 14 Amp and to protect wrong polarity
• Charging terminal:   6" 21 AWG with Standard Male Tamiya plug.
• Discharging terminal: 6" 16 AWG open end wire. Need connector for DIY? Please click here to order.

The pack has 10Ah capacity measured by Computerized Battery Analyzer with500W amplifier. (testing voltage: 30V, testing current:12Amp)

 Please click here to see the discharge curve of 10 Ah pack at 12A

• Please use either 37V Li-Ion smart charger below. 
  • For fast charging (3.0 hrs) , You may use5.0A Smart Li-ion battery charger + the connector adaptor
  • You can choose our 3.0A 37V Smart Li-Ion Battery charger to recharge this pack. The estimate charging time is about 5.0hrs.
  • Smart Charger (1.9A, CE listed, UL approved) for 37V Li-ion/Polymer Rechargeable Battery Pack.The estimate charge time is about 7.9hrs
• Warning:  Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
• If you connect two of these modules in parallel, you may build a 37 V 20 Ah Battery pack with a 28 Amp discharge rate with suitable wiring
• Strongly suggest you put the battery pack into a water / fire resistant box for safety use
• Optional Quality Multi Departments Bag 5.5x4.5x7.5" Please click here to buy separately here.
• Need high drain pack up to 40A rate? Please click here to order.

• Replace 36V NiMH battery pack with much lighter weight  for drain rate < 14 amp
• RC robot and RC aircraft which need high current drain
• Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know the advantages

• Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing
• Please never discharge the battery pack beyond its Max. rating
• Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
• For safety warning please see the link here

• Limited Warranty: Repair or exchange only within 30 days.

• Download user manual.
•