Protection Circuit Module (PCM) with Equilibrium Function & Fuel Gauge for 11.1V Li-Ion Battery Pack at 10A limit --- PCM-B03S10-188 (3S)

Protection Circuit Module for 3 Cells (11.1V) Li-Ion Pack with 10 A max. Limit

This protection circuit is specially designed for 11.1V Li-Ion / polymer Li-Ion Battery pack with 10A discharging rate. Different than normal PCB, it provides equilibrium function after battery pack is fully charged. This is to balance each cell of the pack to make sure all cells are within 4.22V.With this function, Li-ion cell will have a longer service life. 

The PCM will provide the following protection:

• Keep 11.1V Li-Ion Battery pack from overcharge (4.2V/cell)
• Balance each cell at Max. 4.22/cell (voltage tolerance within 0.2V for each cell)
• Keep 11.1V Li-Ion Battery pack from overdischarge (2.48V/cell)
• Limit 11.1V Li-Ion Battery pack's discharging current below 10A
• Need other customized voltage of PCB/PCM with different size? Please click below to order
• Customized 2 Cells PCB for 7.4V Li-Ion / 6.4V LiFePO4
• Customized 3 Cells PCB for 11.1V Li-Ion / 9.6V LiFePO4
• Customized 4 Cells PCB/PCM for 14.8V Li-Ion / 12.8V LiFePO4
• Customized 5-8 Cells PCB/PCM for 18.5V-29.6V Li-Ion / 16V-25.6V LiFePO4
• Customized 8-16 Cells PCB/PCM for 29.6V-59.2V Li-Ion / 25.6V-51.2V LiFePO4
• Customized 16-26 Cells PCB/PCM for 59.2V-96.2V Li-Ion / 51.2V-83.2V LiFePO4

Features:  

Tip:

• You may order seperately our 16AWG red wire and 16AWG black wire for DIY if you need more than 6" long.
• In order display battery energy level from the PCB, you need to order a fuel gauge display here

Warning:

•  Please make sure the AWG gauge of the wire will be compatible with maximum current load. Please click here to view the AWG gauge & AWG electronic current load limit chart.
• If you want to use this pcm for a battery that is rated less than 10A drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
• To achieve balance, each cell in battery pack must have equal voltage within tolerance of 0.2V. After charger LED turn Green, unplug charger and wait 30 minutes before use. This is for the pack to perform balance function.
• You must be professional in Li-Ion battery pack to buy the PCM for DIY. Misusing PCM may cause battery damage or explode.  We are not responsible for any damage caused by user.

Batteryspace is not responsible for any damage cause by misunderstanding and misuse! Please read instruction carefully before assembling.