NiMH Battery Pack Combo: Two 7.2V 4200mAh (Flat) Batteries with Dean Connctor + Smart Fast Charger (4.8-10.8V)

• 2 pcs NiMH Battery Pack: Powerizer 7.2V 4200mAh with Dean Connector for RC-10 Cars
  • High 4200mAh Capacity Nickel Metal Hydride.
  • All Cells are matched.
  • No cell memory, you can recharge the pack without fully discharging!
  • Dimensions (LxWxH): 5.4"(137mm)x1.8"(47mm)x0.9"(24mm)
  • Weight: 14.8 Oz(419.5 grams)  
  • Connector: Standard Female Dean Connector with 14AWG 3.8"(96mm) wire.
    • Come with two pin female Dean plug
    • Vertical plug = Positive
    • Horizontal plug = Negative
    • Plug's dimension (LxWxH): 6.5mm (0.3") x 4.1mm (0.2") x 2.2mm(0.1") 
  • Maximum 30 Amp discharge rate.
  • Specially design for RC Racing Vehicles.
  • Will work with Associated, HPI, LOSI, Traxxas, Tamiya, Kyosho, Losi XXX T- Novak Cyclone, Kisbee 12 turn modified motor, Spektrum DX3 radio w/ Z590 Hi-Torque Race Servo and SR3000 Receiver and all other standard 7.2V vehicles.  
  • Need additional battery? Please click here to order.
• 1 pcs Multi-Current  Smart Fast Charger  (4.8-10.8V)  
  • Worldwide voltage ( 100-240V AC)
  • The charging time is about 2.5 hours at 2 A current
• 1 pcs Connector Adaptor: Convert from Standard Male Tamiya connector to Standard Dean Connector
  • Utilize to connect between the charger and the battery pack while charging
• Need 7.4V Advance Hi-Power Polymer Li-Ion pack for replace 7.2V NiMH RC pack? Please click here  to order seperately
• Due to higher voltage (7.4V) & higher Max current drawn (40A) supply, The RC device will run faster.
• Need longer burn-time? Please utilize pack with higher mAh rate
• Burn-time = (Pack's Wh rate) / Device's Wattage
• Please double check if the size would match up with your RC device

Customer Reviews

• I get about 10-15 minutes of runtime with these batteries over my 5-6 minute 1500 nicd's. I plan on buying another smart charger soon so I can charge all four of my batteries a little quicker, I had doubts about these products at first but so far they have worked great! I also plan to get rid of the tamiya connectors and buy some powerpoles for little resistance and more consistent run times. A++++