
|
Home
NiMH Battery Pack: 14.4V 5000mAh for DIY Diving light/ Bike Lights of Halogen (Trail-Tech Female plug)
|
|
In Stock
Product ID # 2055
Part Number: BL-HC12ITWP
Lead Time: 5 Business Days!
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $58.15 |
| 21 to 50 | $56.95 |
| 51 to 100 | $55.75 |
| 101 or more | $53.96 |
|
Features:
- NiMH Battery Pack: 14.4V 5000mAh
- Can be recharge up to 500 cycles.
- 65' Thermostat built in as temperature senor to avoid battery overcharged beyond 65oC
- One 7 Amp polyswitch installed to limit max. discharging current at 7.0A and to protect wrong polarity
- The battery is well packed by double PVC shrink for water resistant and ready to put in a 2.25" wide neck water bottle.
- Can run 13W / 12V super bright halogen light for 5.0 Hrs.
- Burning time for Halogen light.
- 10W Halogen: 7 hrs ( 3.50 hrs for two light 20 w)
- Note: Light burn brighter by over voltage the light. However, the bulb life will be shorten!
- 4' long of Trail-Tech Coaxis Female Plug for charge/discharge terminal
- Excluded 4' long of Trail-Tech Coaxis Male plug for you to connect pack to light
- Must buy The 9.6-18V Universal Smart charger + the connector adaptor seperatelyin order to charge the pack. (3.3 hrs charging time)
- Dimension (LxD): 240mm (9.45") x 54mm (2.13") to fit a 700mL water Bottle with Cover
- Total weight: 2.5 Lbs (1134 gram)
- Can replace 12V Halogen diving light battery as long as the battery pack fit in canister
- Perfect for DIY a diving light. You may found a stainless steel water bottle as a canister.
- Please keep your old lighting connector. You may need it to make your lighting work properly in case our universal connectors cannot fit your light.
- Included a 70 degree C Thermostat for protecting the battery from overcharge/discharge.
Smart Tips:
- You may put the battery into a stainless steel water bottle for diving which is available in "Kmart " as the follows:
| Buy a Water bottle at Kmart
|
Buy a battery from us
|
Drill hole on cap of bottle ( seal it later by glue)
|
Insert battery into the bottle
|
Find a connector to fit your system
|
Then, a 13.2V waterbottle battery done!
|
|
|
|
|
|
|
|
Product Reviews
|
|
|