NiMH Battery Pack: 12V 10Ah ( 2x5D) for 12V DC Portable Devices

• 12 V  10 Ah (10000mAh) NiMH Battery Pack made by 10 pcs high quality NiMH D size cells. , assembled side by side in two rows ( 5x2)
• Wrapped by heavy duty heat shrink tube

• Standard rate: 10Amp  ( Recommended and warranted)
• Highest rate for continuous running:  20Amp   
• Max. Rate for short time: 50Amp ( Not recommend as working rate )

Two terminals are in the battery pack. Charging and discharging plug are separated for protecting  battery overcharging and power off during discharging

• Discharging plug is male standard tamiya connector
• Charging plug is mini tamiya connector which connected a 70^o thermostat.  to battery pack to protect battery from overcharging.

• Please choose  12V smart NiMH battery pack chargers ( click for detail specs) to recharging the battery pack.
• Must charge battery from charging terminal
• The charging time is about  7 hrs. Please set current level to 1.8A
• You may consider advanced 12.8V LiFePO4 battery packs with higher energy density and 4 times longer cycle life ( click underlined to order )

• Perfect for walking robot -- two time running time than NiCd power pack.
• Perfect for Sea Scooter:  50% less weight than original SLA battery.
• Good for any 12 DC portable device application.

• Please don't discharging the battery pack below 10V  ( 1.0 V / cell)  Deep discharging may damage NiMH battery pack. 
• Charging battery immediately every time it is discharged. Never storage the battery pack at below 10V. 
• Please don't use charger terminal to discharge battery
• Please read more safety warning  at the link
• NOTICE: Any changes made to our battery and charger will VOID warranty.

How To Charge The Battery Pack:

Please download  Instruction manual for charging Nimh pack by Chun-180 Charger.