About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

LiNiMnCo 26650 Battery Pack: 14.8V 16Ah (236.8Wh, 20A rate) with PCM (19.2)

Your Price: $230.95
In Stock

Product ID # 5178
Part Number:

Lead Time: 5 Business Days!

Quantity Discounts

5 to 20$224.02
21 to 50$219.40
51 to 100$214.78
101 or more$207.86


*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
Voltage 14.8 V (working)   16.8 V (peak)  9.6 V ( cut-off)
Capacity 12 Ah (177.6 Wh)
  • Charging/Discharging terminal: 6.0" 14 AWG open end wire
    • Red = Positive
    • Black = Negative
  • 2x PCM with balance function (10.0A limited)installed with the battery pack to protect battery from  
    • Overcharge (> 16.8 V)
    • Over discharge  (<9.6 V)
    • Over drain ( >20 Amp, 10A for each 8Ah module)
    • Short circuits
    • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
Cycle life 80% of initial capacity at 1000 cycles
Charging rate 10 A Max
Max. Discharging Rate 20Amp limited by 2 PCM
Dimensions (LxWxH) 11m(4.5") x 114mm(4.5") x 88mm (3.5")  
Weight 1550  grams (3.0 lbs 6.4 Oz).


  • Replace 12V NiMH and Lead acid battery with much longer cycle life
  • If you connect two of these modules in parallel, you can build a 14.8V 32 Ah Battery pack with a 40 Amp discharge rate. (must use correct wire gauge)


  • 14.8V LiMnNi battery pack shall be cut-off at =<16.8V ( <=4.2V/cell ) during charging and >=8.0V ( >=2.0V/cell)   during discharging  
  • We are not responsible for any damages or losses caused by misuse (included but not limited to: improper charging/discharging, any changes of this battery pack, miss-assembling battery packs)
  • Always pay attention when charging the battery pack. Battery shall put in a place or container with fire - proof to avoid any accident
  • Please always check battery polarity before connection to device. Never make wrong polarity connection
  • For safety warning please see the link here 

Related Products

Related Products

Product Reviews

(0 Ratings, 0 Reviews)

Thermal Spread Material used in Battery Pack Assembly
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Thermal Abuse Test for IEC62133
Lithium Battery Shipping Regulation
Show & Conference
Lithium Battery Power and Safety, Baltimore MD, Nov 17-19, 2015
The Battery Show, Novi. MI, Sept 15-17, 2015 Booth#1716
Battery Power 2015, Denver, CO, August 5-6, 2015 Booth#29
Next Generation Batteries Conference, San Diego, CA, April 21-22, Booth#9
32nd International Battery Exhibit, Mar.9-12,2015, Florida, Booth #209
More ...
Mailing Lists