|
LiFePO4 38120P Battery: 12.8V 10Ah (128Wh, 100A rate) (12.0)
|
|
Out of stock
Product ID # 3988
Part Number: LFP-12.8V10Ah-PCB
Please allow 1week to build and fully test this battery pack before ship out.
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $126.05 |
| 21 to 50 | $123.45 |
| 51 to 100 | $120.85 |
| 101 or more | $116.96 |
|
| Packing
|
|
| Voltage
|
Voltage: 12.8 V (working) 15.2 V (peak) 10.0 V ( cut-off)
|
| Capacity
|
10Ah (128Wh)
|
| Cycle life
|
> 1000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard)
|
| Energy Density
|
|
| Terminal
|
- Excluded wire for DIY, Please click here to order seperately ( Must order correct AWG wire based on American Wire Gauge table )
- Must connect wire & connector with correct polarity. Batteryspace is not responsible for any damage cause by misuse.
- Picture below shown on to connect with excluded 9" long 6AWG wire
|
| Charging rate
|
10A Max
|
| Discharging Rate
|
40 Amp (Continuous discharge rate) - 100 Amp ( < 30 sec Max Surge rate) limited by 6AWG wire
|
| Dimensions (LxWxH)
|
- 82 mm(3.2") x 82(3.2") x 155mm(6.1")
|
| Weight
|
|
| Smart Tips
|
|
| Applications
|
- A Perfect 12.8V Battery module with 100A Max <30 sec Surge drain rate for EV, HEV application
- You may build battery pack for higher voltage (series connection) or higher capacity (parallel connection)
|
| Warning
|
- This battery module does not have PCB installed. Please order one at the link PCB / PCM for 12.0V LiFePO4 Pack
- 12.8V LiFePO4 Prismatic battery pack shall be cut-off at 15.2V during charging and 10.0V during discharging. If over discharge to 10V (2.5V/cell), please recharge the pack right away. Otherwise the battery is over discharge and cannot recover!
- The battery holder may crack down from a heavy load applied, Batteryspace is not responsible for any damage cause by misuse.
- Please click Knowledge on LiFePO4 battery to learn more detail
|
|
Product Reviews
|
|
|