About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

LiFePO4 18650 Battery: 9.6V 1500 mAh (3x18650 Flat, 4A rate, 14.4Wh) with PCB & Polyswitch (1.35)

Your Price: From $25.95 to $28.95
Lead Time: 5 Business Days!

Product Options

Connector option:


*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
Voltage 9.6 V (working)   11.7 V (peak)  6.0 V ( cut-off)
Capacity 1500 mAh
  • Option 1: Charging/Discharging Terminals: 6" 18 AWG open end wires
  • Option 2: Charging/Discharging Terminals: twisted 12.0" 22AWG wire with Molex 22013027 connector
    • Pin 1 = Black
    • Pin 2 = Red  
  • 1x PCB (12A limited) installed with the  battery pack and protects the battery from
    • Overcharge       (>11.7V)
    • Over discharge  ( <6.0V)
    • Over drain ( >12Amp)
    • Short circuits
  • 1x 4.2 Amp polyswitch installed to limit  max. discharging current and to protect wrong polarity
Cycle Life    > 1000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard)
Charging rate 0.5 A ( recommended ),  1.35 A max.
Max. Discharging Rate 4 Amp limited by polyswitch ( lower rate available upon request )
Dimension(LxWxH) 73mm(2.9") x 58mm(2.2") x 1.0" (25mm)  
Weight 4.8oz (140grams)


  • Replace 8.4V NiCd and NiMH battery packs for higher energy density
  • External battery pack to run 6V DC devices, such as digital camera


  • 9V LiFePO4 battery pack must cut-off at 11.7V during charging and 6.0V during discharging  
  • Knowledge on LiFePO4 battery to learn more detail

Related Products

Related Products

Product Reviews

(0 Ratings, 0 Reviews)

Thermal Spread Material used in Battery Pack Assembly
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Thermal Abuse Test for IEC62133
Lithium Battery Shipping Regulation
Show & Conference
Lithium Battery Power and Safety, Baltimore MD, Nov 17-19, 2015
The Battery Show, Novi. MI, Sept 15-17, 2015 Booth#1716
Battery Power 2015, Denver, CO, August 5-6, 2015 Booth#29
Next Generation Batteries Conference, San Diego, CA, April 21-22, Booth#9
32nd International Battery Exhibit, Mar.9-12,2015, Florida, Booth #209
More ...
Mailing Lists