|
|
Li-ion 18500 Cylindrical Rechargeable Cell: 3.7V 1400mAh (5.18Wh) --- UL listed (0.42)
|
In Stock
Part Number: LC-18500
Product ID # 1335
* denotes required field
Tab Options*
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $4.80 |
| 21 to 50 | $4.70 |
| 51 to 100 | $4.60 |
| 101 to 500 | $4.46 |
|
Features:
- 3.7V 18500 size Cylindrical Li-Ion Cell --- UL listed
- No memory effect and longer storage life than NiMH Batteries
- Lighter weight and higher energy density than any other rechargeable battery
- 18500 cell is a little shorter than the 18650 cell, and it is perfect for building compact sized packs and high capacity packs for RC aircraft, RC cars, or camera battery.
Specifications:
| Nominal Voltage
|
Average 3.7 V
|
| Nominal Capacity
|
1400 mAh,
|
| Max.Charging current
|
1.4A Max.
|
| Max. Discharging current
|
2.6 A max.(1.87c)
|
| Dimensions
|
Diameter 18.3 mm (Max 18.4), Height: 50.0 mm (Max 50.3) or 0.71"Dx1.97"H
|
| Weight
|
34 g (1.2 oz)
|
| Internal Impedance
|
Internal Impedance: less or equal to 90 micro-ohm (with PTC)
|
| Cycle Performance
|
80% of initial capacity at 300 cycles
|
| Detail Data Sheet
|
 Please download the product specifications
|
| Tip
|
|
|
Cautions
|
- Li-Ion Batteries may explode if charged or discharged improperly.
- You must possess knowledge of electronic and understand hot to handle Li-ion battery.
- We reserve the right not to sell and void the warranty it you don't meet the above statement.
- You must use a protection IC (PCB) to keep battery from overcharge and over discharge
- Never solder directly onto the Li-ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You will solder to tabs instead directly onto the battery.
- Please read more safety warning about Li-ion battery
|
| Optional
|
- For DIY, you may add tabs as an option at a little extra cost
- You may choose Smart Li-Ion Battery Charger to charge single 18500 cells
- If you DIY by yourself, you MUST install Our PCB or your own PCB with the following feature:
- 4.2V/cell over-charge protection
- 2.5V/cell over-discharge protection
- Max current over-drain protection
- Short circuit protection.
- Batteryspace.com won't liable for any mis-use due to any other brand of PCB applied
- If you don't know how to make Li-Ion pack, please don't DIY, click here to choose a pre-wired Li-Ion pack module from 3.7V-37V
|
|
Product Reviews
|
|
|