Intelligent Digital Balance Charger/Discharger for (NiMH/NiCD 1.2V-18V, Li-Ion 7.4V-22.2V, LFE 6.4V-19.2V, SLA 2V-20V) Battery pack W/O AC adaptor

Features:

• Microprocessor controlled
• Charge / Discharge the SLA Battery pack
• Cyclic charge/discharging: 1 to 5 and continuous process of charge --> discharge / discharge --> charge for battery refreshing. 
• Data storage (Store up to 5 packs in memory)
• Input power monitoring
• Charge / Discharge the 1.2V-18V NiMH/NiCD battery pack
  • Delta-peak sensitivity: Automatic termination program based on principle of the Delta-peak voltage detection.
    • For NiCd pack; Detect Minus delta V >= 12 mV/cell   
    • For NiMH pack For NiCd pack; Detect Minus delta V >= 7 mV/cell 
  • Automatic Charging current limit: Limit the charging current when charging NiMH/NiCd battery
    • 0.5C recommend charge rate for NiMH/NiCd pack
  • Capacity limit: Limit excessive capacity automatically by setting the maximum value.
  • Processing time limit (Safe timer Setting): Limit the process time to avoid any possible defect
    • Safe timer calculation =  (Capacity mAh rate / charging current A rate) / 11.9
  • Charge terminal:two female 4.0mm female Banana plug (Black = Negative, Red = Positive)
    •  Included one 1' long 18AWG Connector Adaptor: from 4.0mm Male Banana plug to Standard Dean Male plug (Please click picture to view)  
    •  Included one  3" long 22AWG Connector Adaptor: from Standard Dean Female plug to alligator Clip (Please click picture to view)   
    •  Included one  4" long 22AWG Connector Adaptor: from Standard Dean Female plug to Male Hi-Tec plug  (Please click picture to view)   
    •  Included one  4" long 22AWG Connector Adaptor: from Standard Dean Female plug to Male BEC plug  (Please click picture to view)   
    •  Included one  4" long 22AWG Connector Adaptor: from Standard Dean Female plug to 3.0mm Male DC plug  (Please click picture to view)   
  • Note: Excluded The temperature sensor connector. Please make sure the pack have a thermostat installed
• Charge / Discharge the 7.4V-22.2V Li-Ion/Li-Ion Polymer, 6.4V-19.2V LiFePO4 pack Battery pack without PCB   
  • Balance each cell voltage is or less than 30mV after fully charged 
  • Balance individual cell during discharging
    • Automatically Shut off after detect the voltage of abnormal cell indicated by ERROR message
  • Charge terminal:  5 JST male sockets installed in the charger for recharging from 2S to 6S Li-Ion/Li-Ion Polymer/LiFePO4 pack separately
    • 3 pins male JST socket for charging 2 cells (2S) pack (7.4V pack Li-Ion pack / 6.4V LiFePO4 pack)
    • 4 pins female JST socket for charging 3 cells (3S) pack (11.1V pack Li-Ion pack / 9.6V LiFePO4 pack)
    • 5 pins male JST socket for charging 4 cells (4S) pack  (14.8V pack Li-Ion pack / 12.8V LiFePO4 pack)
    • 6 pins male JST socket for charging 5 cells (5S) pack  (18.5V pack Li-Ion pack / 16.0V LiFePO4 pack)
    • 7 pins male JST socket for charging 6 cells (7S) pack  (22.2V pack Li-Ion pack / 19.2V LiFePO4 pack) 
  • Note: In order to use the smart balance charger, battery pack must be used with the charging terminal from individual cells as sample shown below: 
    • For 7.4V(2S) pack's charging terminal, please click here to order 3 pin Female JST connector seperately.
    • For 11.1V(3S) pack's charging terminal, please click here to order 4 pin Female JST connector seperately.  
    • Note: You must connect the battery to charger's output terminal while pefrom charging
       
       

Speicification

• Input Voltage: 11~18vDC
• Input terminal: 5.5mm x 2.5mm barrel female socket  
  • Included one  Connector Adaptor: from 5.5mm x 2.5mm barrel male plug to alligator Clip 
    • Perfect connect to 11~18vDC power source 
    •  Please click picture to view how to connect to 12.0V 13.0A NiMH battery pack
  • Excluded 1 pc AC to DC adaptor (Cover from 100-240VAC 50/60Hz to 12VDC 5A)
  • Need car plug adaptor for charge in car? Please click here to order seperately
• Charge Current Range: 0.1~5.0A
• Discharge current range: 0.1~1.0A
• Dimension(LxWxH): 137mm(5.4")x87mm(3.4")x32mm(1.2")
• Weight: 10.0Oz (283grams)
•    Please click here to download the user manual