|
High Power Polymer Li-Ion Cell: 3.7V 4000 mAh (6050140-10C) 14.8Wh, 40A rate - UL Listed / UN Listed (NDGR)
|
|
In Stock
Product ID # 3254
Part Number: PL-6050140-10C
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $24.20 |
| 21 to 50 | $23.70 |
| 51 to 100 | $23.20 |
| 101 or more | $22.46 |
|
| P/N
|
PL-6050140-10 , UL listed/UN approved
|
| Capacity:
|
- Nominal: 4100mAh
-
Min. 4000 mAh
-
Average: 14.8 Wh ( Capacity will reduce with cycle life , Battery labeled with Min. capacity at 300 cycles
-
Energy Density: 174 wh/kg
|
| Cycle life:
|
> 500 times
|
| Charging rate
|
recommend: 2A (0.5C rate) Max: 4A
|
| Discharging Rate:
|
40 A Max. ( 10 C rate)
|
| Size with tolerance +/- 0.5 mm:
|
6.0 (thick) x 50.2 (width) x 141 (length) mm
|
| Weight:
|
3.0 Oz (85 grams)
|
| Data Sheet
|
|
| Tips:
|
- You may choose our smart Li-Ion Battery charger to recharge this battery. ( 4 hrs charging time)
- If you DIY by yourself, you MUST install Our PCB or your own PCB with the following feature:
- 4.2V/cell over-charge protection
- 2.5V/cell over-discharge protection
- Max current over-drain protection
- Short circuit protection.
- Batteryspace.com won't liable for any mis-use due to any other brand of PCB applied
- The polymer battery is excellent for ebike , RC robot and other high drain DC device up to 40A
|
| Warning
|
- Li-Ion Batteries may explode if charged or discharged improperly.
- The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs
- For High power Li-Ion battery, you may not use PCB in discharging terminal, however you must cut-off power before battery voltage drop to 2.5V /cell
- We must use a protection IC ( PCB) to keep the battery and its pack from over charging.
- Please read more safety warning about Li-ion battery
|
|
|
|
|
|
|
|
|
MSRP Price: $119.99
Your Price: $99.99
You Save: $20.00 (17 %)
|
MSRP Price: $139.95
Your Price: $114.95
You Save: $25.00 (18 %)
|
| |
Product Reviews
|
|
|