|
|
High Power Polymer Li-Ion Cell: 3.7V 10 Ah (9759156-5C) 37Wh, 50A rate --- UL listed
|
In Stock
Part Number: PL-9759156-5C
Product ID # 3819
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $46.51 |
| 21 to 50 | $45.55 |
| 51 to 100 | $44.59 |
| 101 to 500 | $43.16 |
|
| Chemistry
|
High Power Polymer Li-Ion
|
| Capacity:
|
- Nominal: 10100mAh
-
Min. 10000 mAh
-
Average: 37 Wh ( Capacity will reduce with cycle life , Battery labeled with Min. capacity at 300 cycles )
-
Energy Density: 171 wh/kg
|
| Cycle life:
|
> 500 times
|
| Charging rate
|
5 A Max. (0.5C rate)
|
| Discharging Rate:
|
50 A Max. ( 5 C rate)
|
| Size:
|
9.8mm (thick) x 59.5mm (width) x 157mm (length)
|
| Weight:
|
7.4oz / 210g
|
| Data Sheet
|
|
| Tips:
|
- You may choose our smart Li-Ion Battery charger to recharge this battery (10 hrs charging time)
- If you DIY by yourself, you MUST install Our PCB or your own PCB with the following feature:
- 4.2V/cell over-charge protection
- 2.5V/cell over-discharge protection
- Max current over-drain protection
- Short circuit protection.
- Batteryspace.com won't liable for any mis-use due to any other brand of PCB applied
- The polymer battery is excellent for e-bike , RC robot and other high drain DC device up to 50A
|
| Warning
|
- Li-Ion Batteries may explode if charged or discharged improperly.
- The end user must have the technical knowledge necessary to charge and discharge Li-Ion batteries before making Li-Ion Battery Packs
- For High power Li-Ion battery, you may not use PCB in discharging terminal. However, you must cut-off power before battery voltage dop to 2.5V /cell
- You must use a protection IC ( PCB) to keep the battery and its pack from over charging.
- Please read more safety warning about Li-ion battery
|
Please click link below to see advanced 10Ah Li-ion battery
|
Product Reviews
|
|
|