|
High Power Polymer Li-Ion Box Battery:14.8V 20Ah (296Wh, 30 A Drain Rate) w/ Fuel gauge & End Plug (24.0)
|
|
In Stock
Product ID # 3830
Part Number: HLPB-9759156C-4S2P-FG
Lead Time: 5 Business Days
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $473.31 |
| 21 to 50 | $463.55 |
| 51 to 100 | $453.79 |
| 101 or more | $439.16 |
|
| Packing
|
|
| Voltage
|
14.8 v (working) 16.8 V ( peak)
|
| Capacity
|
20 Ah (296 wh)
|
| Cycle life
|
>300
|
| Prewired
|
- One PCM with balance function is installed with the battery pack to protect battery from
- Overcharging beyond 4.25V/cell
- Over-discharging below 2.75V/cell
- Over-drain beyond 30 A
- Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
- Charge/Discharge terminal: Copper Barrel Lug terminal attached via Binding Post
- Barrel Lug terminal size: 0.6"(14mm) L x 0.3" (8mm) W x 0.04" (1mm) H
- Binding Post size: 0.8"(19mm) Dia x 1.2"(30 mm) L
- Red Binding Post = Positive
- Black Binding Post = Negative
- Must use proper AWG wire gauge to match up the max discharge current (30A), Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table.You may consider to DIY with our wire below.
|
| Max. Discharging Rate
|
30 Amplimited by PCM
|
| Dimensions (LxWxH)
|
- 232mm (9.2") x 120mm (4.8") x 3.0"(75 mm)
- L is the length with Binding Post's length
|
| Weight
|
4.7Lb (2134 grams)
|
| Smart Tips
|
- For fast charging (5.0 hrs) , You may use6.0A Smart Li-ion battery charger + Connector Adaptor: From 4 Pin male Cannon plug to Clips
- You shall choose our 3.0A 14.8V Smart Li-Ion battery charger to recharge this battery pack via clip connector included.The estimated charging time is about 10 hours.
- If you connect two of these modules in parallel, you may build a 14.8 V 40 Ah Battery pack
- Must plug Standard Male Tamiya end to the Standard Female Tamiya plug of the charger with correct polarity.
- Must plug Clip end to the connector of the battery pack with correct polarity
- Red Clip = Positive
- Black Clip = Negative
- Warning: Wrong polarity will damage the charger, Batteryspace are not responsible for the damage or losses caused by misusing
- Need High Power Polymer Li-Ion Module: 14.8v 50 Ah (740 Wh, 60A rate) with PCM? Please click here to order
|
| Applications
|
|
| Warning
|
- Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing
- Please never discharge the battery pack beyond its Max. rating
- Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
- For safety warning please see the link here
|
| Warranty
|
- Limited Warranty: Repair or exchange only within 30 days.
|
|
Product Reviews
|
|
|