About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Custom High Power Polymer Li-Ion Battery: 88.8V 10Ah (9759156-5C, 888 Wh, 50A rate)

Your Price: $1,205.95
In Stock

Product ID # 5971
Part Number:

Lead Time: 10 Business Days


*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
Voltage 88.8 v (working)   100.8 V ( peak)   60V ( cut-off)
Capacity 10Ah   (888 wh)
  • Charging terminal: 6" 14AWG with Standard Male Tamiya plug.
  • Discharging terminal: 6" 8AWG open end wire.
  • Charge & Discharge terminal located on top 160mm x 65mm plane
  • 1x PCM with balance function installed in the battery pack to balance charging and protect battery module from
    • Over disch
    • Over discharge beyond 100.8V
    • arge below 60V
    • Over drained beyond 60A
    • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
Cycle life >300 
Charging Rate
  • 5 A (0.5C rate Recommend)
  • 10A (1.0C Max)
Max. Discharging Rate 50 Amp Limited by cells
Dimensions (LxWxH) 10"(256mm)x 6.6"(167mm) x 4.72"(120mm)       
Weight (approx.) 15.5lb (7.0kg)



  • Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
  • Please note this battery is for R&D use only and NOT for individual customer. We are not responsible for any damages or losses caused by misusing
  • Please never discharge the battery pack beyond its Max. rating
  • Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
  • For safety warning please see the link here

Related Products

Related Products

Product Reviews

(0 Ratings, 0 Reviews)

Thermal Spread Material used in Battery Pack Assembly
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Thermal Abuse Test for IEC62133
Lithium Battery Shipping Regulation
Show & Conference
Lithium Battery Power and Safety, Baltimore MD, Nov 17-19, 2015
The Battery Show, Novi. MI, Sept 15-17, 2015 Booth#1716
Battery Power 2015, Denver, CO, August 5-6, 2015 Booth#29
Next Generation Batteries Conference, San Diego, CA, April 21-22, Booth#9
32nd International Battery Exhibit, Mar.9-12,2015, Florida, Booth #209
More ...
Mailing Lists