High Power Polymer Li-Ion Battery: 37V 10Ah (370Wh) Battery with 3.0A smart charger, A Fire Retardant Bag & bag for ebike 30A Drain Rate (30.0)

• High Power Polymer Li-Ion Battery: 37V 10Ah (370Wh) Battery with 3.0A smart charger, A Fire Retardant Bag & bag for ebike 30A Drain Rate
• The state art of PCM is installed in the pack to protect battery from over-charged, over-discharged and over-drained
• Wrapped by heavy-duty Heat shrink tube
• Included one 3.0A  37V Smart Li-Ion battery charger to recharge this battery pack.  The estimated charging time is about 5 hours. 
  • Warning:  Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
• Included one Quality Multi Departments Bag 5.5x4.5x7.5"

• Included 1 pcA Fire Retardant Bag: 295mmx230mmx75mm --- Reduce the chance of damage if caught fire
  • This Fire Retardant Bag (Li-Ion Safer Bag) is intended to reduce the chance of damage in the event of catching fire.
  • Must locate & seal the battery pack in the bag  while charging / leaving without any attention 

  How to charge the pack by included3.0A charger. 

• One PCM (30A limit) with balance function  installed in the battery pack to balance charging and protect battery module from
  • Over discharged beyond 42V
  • Over discharged below 25V
  • Over drained beyond 30A
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Charging terminal:   6" 21 AWG with standard Male Tamiya plug.
• Discharging terminal: 6" 12 AWG open end wire. You may choose a connector in our store ( click to link)

• If you connect two of these modules in parallel, you may build a 37 V 20 Ah Battery pack with a 60 Amp discharge rate with suitable wiring
• Strongly suggest you put the battery pack into a water / fire resistant box for safety use

• Replace 36V NiMH battery pack with much light weight  for e-bike
• RC robot and RC aircraft which need high current drain
• Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to the advantages

• Please note we are not responsible for any damages or losses caused by misusing
• Please never discharge the battery pack beyond its Max. rating
• Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
• For safety warning please see the link here
• 

Please see our real time testing when attached the pack to E-bike ( 36V 600W conversion kit)

   Please click here to download the Video Clip file1  (37V 8Ah Polymer Li-Ion pack installed with e-bike )

   Please click here to download the Video Clip file2  (using a watt-up to monitor drain current during riding at 30A )

• Download user manual.