About Payment 
 Shipping & Cost
 FAQ's
 Warranty/Return
 Battery Specifications
 Battery Terminology
 Testimonials
 Visit Our Plant
 Career Opportunity
 Battery Knowledge
 Purchase Order
 Privacy Policy
 Export restrictions



 


Compact Smart Charger (0.6A) for 7.2V - 12 V NiMH/ NiCd Battery Packs with Male Universal connector

Your Price: $18.95
In Stock

Product ID # 2461

Part Number:
CH-UN123TP



Quantity Discounts

QuantityAmount
5 to 20$18.38
21 to 50$18.00
51 to 100$17.62
101 or more$17.06
  • Universal  Smart Charger for any NiMH /NiCd battery packs from 7.2V-12V 
  • 90-260V AC input for world wide voltage support.
  • Compact size, directly plug in without power cord, and easy to carry.
  • Charging current is 600 mA
  • Designed for slow charging  7.2V-12V  NiMH and NiCd Battery Packs. Built in IC will recognize battery pack's voltage ( from 7.2V- 12V ) automatically.
  • Idea for RC air battery packs and battery packs with capacity < 4000 mAh
  • Using Pulse and Negative pulse technology ( 10% negative puls ) to avoid battery from overheating and polarized during fast charging, Significantly increasing battery pack's cycle life.
  • Automatically detect battery pack's voltage, Red LED will be on during charging.
  • Automatically cut-off by negative delta V when battery pack gets fully charged.  
  • Charging time from approx. 30 mins to 100 mins depending on the capacity of battery.
    • For 3000 mAh battery pack, charging time is about 5 hours
    • for 2000 mAh battery pack , charging time is 3.5hours.
    • For 600mAh battery pack , charging timer is about 1.2 hrs
  • Charging connector :  Two pins male universal connector
  • It is very smart charger. You don't need take care anything, just plug in and wait until battery is fully charged
  • Size: 3.2"L x 2.1"W x 2.8"H
  • Weight: 4.3oz.  (122 g)

Operation Instruction:

  • Connect battery pack to output connector and plug AC power source
  • Make sure battery polarity is connected correctly (Red wire is positive)
  • When the unit connect the AC source, the red LED and green LED flash for two times, then all off.
  • After it connect the correct battery pack, the red LED will be on, shows that it is charging.
  • After battery is fully charged, green LED will be on and it shows the battery fully charged.

Precautions:

  • Please don't use the charger for low capacity battery pack (<600mah). We are not responsible for any damage caused by charging other brand battery using this charger.

Smart Tip:

Via a battery holder ( 6- 10 cells) , you can use this smart charger to recharge a group single cell  ( 6- 10 pcs ). 

Related Products

Product Reviews

(0 Ratings, 0 Reviews)