Compact Battery Balance Charger for 7.4V- 11.1V Li-Ion pack

Feature

• Compact Balance Charger designed for 7.4V-11.1V Li-Ion battery, especially for recharging below Hi-Power polymer Li-Ion Battery packs without PCB for RC Car and RC Airplane to get better power balance than conventional smart charger.
  • 7.4v 2100mAh 10-12C Discharge Rate (w/o PCB)
  • 7.4v 3000mAh 10-12C Discharge Rate (w/o PCB)
  • 7.4v 4000mAh 10-12C Discharge Rate (w/o PCB)
  • 11.1v 2100mAh 10-12C Discharge Rate (w/o PCB)
  • 11.1v 3000mAh 10-12C Discharge Rate (w/o PCB)
• Input : 110-240V AC 50/60Hz USA plug
  • Need international AC plug? Please click here to order
• Output: Two JST male sockets installed in the charger for recharging 7.4V(2S) and 11.1V(3S) Li-Ion pack separately
  • 3 pins male JST socket for charging 2 cells (2S) pack (7.4V pack)
  • 4 pins female JST socket for charging 3 cells (3S) pack (11.1V pack)
    • Note: Please do not charge 2S/3S pack at the same time
• Charging Voltage: 8.4V +/-0.06V for 2S pack, 12.6V+/-0.1V for 3S pack
• Balance each cell voltage is or less than 30mV
• Charging current: 650mA
• Three LED (Cell1, Cell2 and Cell3) indicate different status
  • Orange LED = Power On
  • Green LED = Stand By / Full
  • Red LED = Charging
  • Red Flashing LED = Fault
• Dimension (LxWxH): 3.9"(98 mm) x  2.3"(58mm) x 1.3"(33mm)
• Weight: 193g(6.8Oz)
• Warning: In order to use the smart balance charger,  Li-Ion battery pack must be used with the charging terminal from individual cells as indicated below:
  • For 7.4V(2S) pack's charging terminal, please click here to order 3 pin Female JST connector separately.
  • For 11.1V(3S) pack's charging terminal, please click here to order 4 pin Female JST connector separately.