Features:

• 0-105VDC adjustable
• 0 - 10A Max adjustable
• CC (Constant Current) /CV (Constant Voltage) Mode
• Overload Protection
• Low ripple noise,
• High efficient
• Color four LED Digital Panel Meters Voltages and Current Display.
• Can be used as a smart charger to recharge Li-Ion and LiFePO4 battery pack up to 24 cells in series

• Input Power: AC 110V/220VAC, 50+/- 10Hz , China (Mainland) AC plug

  • For USA & International use, please click here to order AC plug adaptor seperately

• Output Power (Adjustable): DC 0 -105V Max, 0 - 10A Max

• Constant Voltage Operation:

  • Power Source efficiency: 0.2%+20mV
  • Load efficiency: 0.2%+20mV
  • Ripple and noise: 0.3%+30mV(rms)
• Constant Current Operation:
  • Ripple and noise: 0.3%+30mA(rms)
• Over Supply voltage protection: Automatically shut off and alarm alert when DC voltage supply higher than setting voltage.
• Operation temperature: <40'C (104F)
• Meter: Voltage/ Current display: 4 Digits panel meter: Accuracy: ( +/- 1% of rdg +2 digits)
• Output terminal: Charge / Discharge terminal: Binding Post excluded Barrel Lug terminal size: 0.6"(14mm) L x 0.3" (8mm) W x 0.04" (1mm) H
  • Binding Post size: 0.8"(19mm) Dia x 1.2"(30 mm) L
    • Red Binding Post = Positive
    • Black Binding Post = Negative
  • Must use proper Barrel Lug / AWG wire gauge to match up the max discharge current (10A)
    • For AWG wire gauge, Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table.
  • Warning: Wrong polarity will damage the DC Power Supply, and Batteryspace are not responsible for the damage or losses caused by misusing

• Dimension (LxWxH): 500mm(19.7") x 448mm(17.6") x 100mm(3.9")
• Weight: 31Lb(14061 grams)
• Please click here to view user manual: how to charge 37V 10Ah Polymer Li-Ion pack by AC-DC Power Supply

Applications:

• This DC Power supply can be used as a smart charger for LiCo battery pack upto 24 cell inseries (88.8V) and LiFePO4 battery pack up to 25 cells in series. You must set correct cut-off voltage before charging according to battery pack's chemistry and voltage to ensure safe charging.

  • For Li-Ion battery pack, cut-off voltage setting shall be 4.2V x Cell's number in series , for example, 24 cells / 88.8V battery pack, cut-off voltage is 100.8V

  • For LiFePO4 battery pack, cut-off voltage setting shall be 3.8V x Cell's number in series , for example, 24 cells / 76.8V battery pack, cut-off voltage is 91.2V

  • Must set up constant current equal or less than specified charging current in cell

  • Higher charging voltage may cause Li-Ion battery exploding or fire

• Smart Tip: In order to keep the 24cells Li-Ion / LiFePO4 battery pack balance while charging, you may use our BMS (Battery Management System) below.

  • Battery Management System (Master Module) with two Relays for Li-Ion battery Pack up to 89V 500A rate

  • Battery Management System (Master Module) for Li-Fe-P battery Pack up to 77V, 500A rated)

DC Power Plug: China (Mainland) AC plug

How to convert into USA AC plug by USA plug adaptor

Utilize for charge a Li-Ion 37V 10Ah pack (charge voltage = 42.26VDC)

Back view of the DC power source (Please click picture to view large size)