The TSL 36-6 Smart Charger is designed for charging 6Ah - 60Ah 38.4V ( 12 cells ) LiFePO4 battery pack. It features with three stages charging (Constant Current,Constant Voltage & Trickle charge mode) and promise 38.4V LFP battery to get full without overcharged.

• INPUT
  • AC input voltage 90 to 130 VAC , single phase
  • Input frequency 47 to 63 Hz
  • Efficiency 72%(min)at rating power,115Vac 60Hz
• OUTPUT:
  • CCCV (Constant Current Constant Voltage) charging mode
  • Cut-off voltage: 43.8VDC
  • 6 A current Max.

  • Charge terminal: 14AWG wire Standard female Tamiya plug.

    • Do not detach Standard female Tamiya plug from charger

  • Included one pcs connector adaptor, convert from Standard Male Tamiya plug to alligator Clip

    • Must plug Standard Male Tamiya end to the Standard Female Tamiya plug of the charger with correct polarity.
    • Must plug Clip end to the connector of the battery pack with correct polarity
      • Red Clip = Positives
      • Black Clip = Negative
    • Warning: Wrong polarity will damage the charger, and Batteryspace are not responsible for the damage or losses caused by misusing
• CHARGE
  • The Battery range is between 6AH to 60AH
  • Reverse Polarity Protection
  • Short Circuit Protection
  • No trigger voltage requirement
• Built in cooling fan to ensure charger long service life
• Dimension (LxWxH): 210mm(8.3")x 174mm(6.9") x 76mm(3.0")
• Weight: 4.9lb (2222 grams)
• Please click here to download user manual

Optional Connector Adaptor; from Standard Male Tamiya connector to 5.5 mm x 2.1 mm Barrel plug

How to connect with the included connector adaptor, Standard male plug to alligator Clip

Charge terminal: 14AWG wire Standard female Tamiya plug.

Warning:

• Charge LiFePO4 rechargeable pack for 38.4V only
• Do not detach Standard female Tamiya plug from charger
• Do not expose the product to rain or humidity to prevent from electric shock
• It is normal if the product gets slightly hot in using
• Keep the product out of the reach of children
• A quality and correct polyswitch must be installed to battery pack to avoid accident.
• Do not open the charger and touch any part of the product to prevent from electric shock
• We are not responsible for any damage caused by misuse.