FEATURES:

• Smart design with adjustable pins and capable charge most Li-Ion cell phone battery on market.
• Alligator clips is included to recharge 3.7V Li-Ion battery pack
• Two JST connector Jack for charging I-pod internal battery pack
• Smart charger: Stops and detects incorrect polarity. Stop charging when battery is fully charge.
• Travel package: Small and compact. 3 1/2 x 2 x 1 1/2 inch
• Never worry about losing power, charger or cord. This is the one you need for all your cell phone batteries.
• It is suitable for poly-Li battery and any prismatic Li-Ion battery with capacity between 150- 1500mAh .

Technical Specification:

• Input voltage: AC 110 - 240V worldwide
• Unloaded Voltage: DC =< 12V
• Electrification Current: DC 150mA +/- 50mA
• Electrification Limited Voltage: DC 4.25V +/- 0.05V
• Lightweight: 2 oz.

How to use the charger:

• Connect the battery holder with alligator clip as shown at Pic1.1
• Plug to any 110-240AC wall plug.
• Press "TE" for Polarity check . The solid green at CON channel indicate ready to charge.
• The charger can charge even you connect with wrong polarity.
  • If wrong polarity, you can press "SW" to change polarity to start charging
• Note the operating light below:
  • - Once the charger have power on, the solid red light will appear at PW indicator.
  • - Flashing green light at CH indicator means charging.
  • - Solid green LED at FUL indicator means fully charge.

The space of two pins is adjustable Two JST connector jack can plug in3.7V I-Pod battery battery (1-2 Generation)

Use DC jacket with Alligator clips to charge individual cell