Li-Ion Slave Module (BMS-LCSM) Features and Specifications to work with BMS-LC24:

• Size (LxWxH): 2.59" (66mm) x 1.50" (38mm) x 0.45" (11.4mm)
• Weight: 1.5oz (42g) with 5.0' cable and temperature sensor
• Nominal Bolt Spacing: 2.36"
• Bolt Slot Width: 0.25"
• Voltage Resolution: 1mV
• Voltage Accuracy: +/-5mV typical
• Voltage measurement range: 1.9-5V (Lithium Iron Phosphate version), 2.7-5V (Lithium Cobalt version)
• Cell temperature measurement accurate to 1 degree C typical
• Cell temperature measured at bolt terminals or with optional temperature probe
• Environmental: Conformally Coated
• Balancing: Dissipative
• Supplied as PCB with cable
• Bolts directly to smaller Thunder Sky/International Battery LCP/LFP cells
• Mounting holes and solder pads for integration with 18650, 26650 and other pack configurations
• High-precision cell voltage measurement, 1mV resolution
• +/-5mV typical accuracy, +/-2mV typical accuracy after optional calibration
• 300uA typical current draw
• Innovative cell balancing scheme is efficient yet tolerant of capacity mismatch
• 3 Hz sampling rate
• Conformal coating available
• Includes on-the-fly cell balancing when used with GLD
• Shunts at programmed maximum voltage in disconnected mode
• Visual indication of cell (over/under voltage/temperature)
• You need to order at least two Cell Modules.
• Please click here to download user manual
• Please click here to view manual: how to build 14.8V Li-Ion battery (4 slave modules system with 4 pcs BMS-LCSM & 1 pcs BMS-LC-24R500)

Note: This slave module does get "hot" when performing balancing function. Please locate this where heat won't damage the battery!