Polymer Li-ion Box Battery: 25.9v 12.6Ah (326.34 Wh, 18A rate) in Plastic Enclosure with Fuel gague ( End Plug)

Polymer Li-ion Box Battery: 25.9v 12.6Ah (326.34 Wh, 18A rate) in Plastic Enclosure with Fuel gague ( End Plug) (26.46)

Polymer Li-ion Box Battery: 25.9v 12.6Ah (326.34 Wh, 18A rate) in Plastic Enclosure with Fuel gague ( End Plug)

Packing

25.9 V 12.6 Ah pack is made by 7 pcs Polymer Li-Ion cell of 3.7V 12600mAh batteries with one high current PCM
Battery pack is placed in Plastic Enclosure (10-22)
Fuel Gauge for PCB of 25.9v Li-Ion Battery Pack (7 cells pack) is installed on surface of battery pack

Touch the switch on the display , you can monitor the energy level of battery pack

Voltage 25.9 v (working) 29.4 V ( peak) 17.5V ( cut-off)

Capacity 12600 mAh (326.34 wh)

Protection

One PCM (40A limited) is installed in the battery pack to balance charging and protect battery module from

Over-charge (> 29.6 V)
Over-discharge ( < 16.1V)
Over drain ( > 80 Amp)
Short circuits
Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.

Two 9 Amp polyswitch installed to limit 18A max. discharging current and to protect wrong polarity

Pre-wired

Charge/Discharge terminal: Copper Barrel Lug terminal attached via Binding Post

Barrel Lug terminal size: 0.6"(14mm) L x 0.3" (8mm) W x 0.04" (1mm) H
Binding Post size: 0.8"(19mm) Dia x 1.2"(30 mm) L

Red Binding Post = Positive
Black Binding Post = Negative

Must use proper AWG wire gauge to match up the max discharge current (8A), Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table. You may consider to DIY with our wire below.

14AWG Red wire and 14AWG Black wire.
16AWG Red wire and 16AWG Black wire.

Max. Discharging Rate 18 Amp limited by polyswitch ( lower rate available upon request )

Dimensions (LxWxH) LxWxH: 232mm(9.2") x 120mm(4.8")x 3.0"(75 mm)

L is the length with Binding Post's length

Weight 4.4Lb (2000grams)

Smart Tips

Please use either 25.9V Li-Ion smart charger below.

For fast charging (3.15 hrs) , You may use 6.0A Smart Li-ion battery charger + Connector Adaptor: From 4 Pin male Cannon plug to Clips
You may use 3.0A Smart Li-ion battery charger to fast charge with 6.3 hrs charge time.
You may use Smart Charger (2.8A, CE listed, UL approved) for 25.9V Li-ion/Polymer Rechargeable Battery Pack with 6.75 hrs charge time.

Must plug the charger and the connector adaptor via only charge terminal with correct polarity.
Batteryspace.com will not be resonsible for any damage caused by missusing.
Need a matched connector? please find it here
Other type connector is available upon request
Optional for Fire Retardant Bag: 295mmx230mmx75mm. Please click here to order.

Applications

Autonomous submarine to drive a 24V DC motor
Replace 24V NiMH battery with higher energy and less weight
RC robot and RC aircraft with higher energy needs

Warning

Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing (included but not limited to: miss-charging, miss-discharging, any changes of this battery pack, mis-assembling batterypacks)
Never discharge the battery pack beyond Max. limit.
Must read before place an order. Please download fill the form and fax back to 510-525-4728. Attn: BatteySpace-Tech.
For safety warning please see the link here

Price: $344.95
Buy Product Online | Visit Store Home

  Related Products

  Smart Charger (6.0A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack- 110V-240V - Smart Charger (6.0A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack
  High Power Polymer Li-Ion Battery: 25.9v 21Ah (543.9 Wh, 40A rate) with PCM - High Power Polymer Li-Ion Battery: 25.9v 21Ah (543.9 Wh, 40A rate) with PCM (44.1)
  Smart Charger (2.8A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack ( Standard Female Tamiya Plug) , CE listed, UL approved - Smart Charger (2.8A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack ( Standard Female Tamiya Plug) , CE listed, UL approved
  Polymer Li-Ion Box Battery with fuel gauge: 25.9V 12.6Ah (326.34 Wh. 18A rate) in Aluminium Enclosure + A Fire Retardant Bag - Polymer Li-Ion Box Battery with fuel gauge: 25.9V 12.6Ah (326.34 Wh. 18A rate) in Aluminium Enclosure + A Fire Retardant Bag (26.46)
  Connector/Adaptor: From 4 Pin Cannon male to Standard Tamiya Female - Connector/Adaptor: From 4 Pin Cannon male to Standard Tamiya Female
  Connector/Adaptor: From 4 Pin male Cannon plug to Clips - Connector/Adaptor: From 4 Pin male Cannon plug to Clips
  Component - Connector: 4 Pin male Cannon plug for CH-Z-USC-25.9V-6.0/ CH-Z-USC-37.0V5A Charger etc - Connector: 4 Pin male Cannon plug for CH-Z-USC-25.9V-6.0/ CH-Z-USC-37.0V5A Charger etc
  Smart Charger (3.0A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack ( Standard Female Tamiya Plug) 100- 240V - Smart Charger (3.0A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack ( Standard Female Tamiya Plug) 100- 240V

Other Items from 25.9V Li-Ion Packs (7S)

  Polymer Li-Ion Box Battery: 25.9V 5.7Ah (147.63 Wh, 7A rate, Trail-Tech Female plug) in Aluminium Enclosure - Polymer Li-Ion Box Battery: 25.9V 5.7Ah (147.63 Wh, 7A rate, Trail-Tech Female plug) in Aluminium Enclosure (11.97)
  High Power Polymer Li-Ion Battery: 25.9v 21Ah (543.9 Wh, 40A rate) with PCM - High Power Polymer Li-Ion Battery: 25.9v 21Ah (543.9 Wh, 40A rate) with PCM (44.1)
  High Power Polymer Li-Ion Battery: 25.9v 42Ah (1088 Wh, 40A rate) with PCM - High Power Polymer Li-Ion Battery: 25.9v 42Ah (1088 Wh, 40A rate) with PCM (88.2)
  Customize Polymer Li-Ion Box Battery with thermistor: 25.9V 12.6Ah (326.34 Wh. 18A rate) in Aluminium Enclosure + A Fire Retardant Bag - Customize Polymer Li-Ion Box Battery with thermistor: 25.9V 12.6Ah (326.34 Wh. 18A rate) in Aluminium Enclosure + A Fire Retardant Bag (26.46)
  Polymer Li-Ion Battery Module: 25.9v 6.4 Ah (166 Wh, 7A rate) with PCM + A Fire Retardant Bag - Polymer Li-Ion Battery Module: 25.9v 6.4 Ah (166 Wh) with PCM + A Fire Retardant Bag (13.44)
  Polymer Li-Ion Battery Module: 25.9v 10Ah (259 Wh) 7A rate with PCM + A Fire Retardant Bag - Polymer Li-Ion Battery Module: 25.9v 10Ah (259 Wh, 7A rate) + A Fire Retardant Bag (21.0)
  Li-Ion 18650 Battery: 25.9V 2600mAh (67.34Wh, 4.2A rate) with PCM & Fuel guage display - Li-Ion 18650 Battery: 25.9V 2600mAh with PCM & Fuel guage display (5.46)
  Li-Ion 18650 Battery: 25.9V 2600mAh (67.34Wh, 4.2A rate) battery module with PCM - Li-Ion 18650 Battery: 25.9V 2600mAh battery module with PCM (5.46)
  Li-Ion 18650 Battery: 25.9V 5200mah (134.68Wh, 7.0A rate) battery module with PCM - Li-Ion 18650 Battery: 25.9V 5200mah battery module with PCM (10.92)
  Polymer Li-ion Box Battery: 25.9V 6400mAh (165 wh, 7A rate) in Plastic Enclosure - Polymer Li-ion Box Battery: 25.9V 6400mAh (165 wh, 7A rate) in Plastic Enclosure (13.44)
  Polymer Li-ion Box Battery: 25.9v 12.6Ah (326.34 Wh, 18A rate) in Plastic Enclosure with Fuel gague ( End Plug) - Polymer Li-ion Box Battery: 25.9v 12.6Ah (326.34 Wh, 18A rate) in Plastic Enclosure with Fuel gague ( End Plug) (26.46)

Return To BatterySpace.com/AA Portable Power Corp. Tel: 510-525-2328


Ecommerce powered by MonsterCommerce shopping cart.