Product Specification	Please download the product specification PDF
Packing & Wireing	11.1V 8500 mAh Polymer Li-Ion pack is made by 6 pcs Polymer Li-Ion cell of 3.7V 4250mAh (5467100) in 3S2P (3 serial & 2parallel) connection. The battery pack is wrapped by black PVC shrink tube 6" 18 AWG open end wires
Voltage	Voltage: 11.1V (working) 12.6V ( peak) 8.3V ( cut-off)
Capacity	8500 mAh min. (94.35 wh)
Protection (click underlined to see details specs for components)	Two PCB (8A) installed with the battery pack and protects the battery from Overcharge (>13.05V) Overdischarge ( < 7.2 V) Over drain ( > 16 Amp) Short circuits Two 7 Amp polyswitches installed to limit max. discharging current at 14 Amp
Operation temperature	-20 oC - 50 oC
Max. Discharging Rate	14 Amp limited by polyswitch
Cycle Life	> 500 cycles under 0.5C ( 4.25A) charging and discgarhing condition
Dimensions (LxWxH)	4.1" (105mm) x 2.9" (74mm) x 1.6" (41mm)
Weight	1.15 Lb (522g)
Smart Tips	You shall choose our 1.5A smart Li-Ion pack charger to recharge the battery pack. The charging time is about 8 hours
Applications	Can run 12V - 14.8V portable DC device up to 8 Amp drain. Perfect DIY for 12v HID light sytem with our connector and portable case. You can also replace any 12V NiMH battery pack and 11.1 V (10.8V) Li-Ion battery pack for DIY purposes of Bike lights, such as Niterider, Headtrip, Storm, Blowtorch etc Starfire Dual or single Beam Nightpro Extrem EVO etc Cateye Stadium 21W HID
Warning	Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks...) . Always charge battery with attention. Battery pack shall be placed on a fire-proof place to avoid any accident Please check battery polarity before plug battery into light. For safety warning please see the link here