| Packing |
- 25.9 V 16Ah pack is made by two 25.9V 8Ah Polymer Li-Ion battery modules (parallel connected ) with two PCM with balance function
- Wapped by heavyduty Heat shrink tube
|
|
Voltage |
25.9 v (working) 29.4 V ( peak) 17.5V ( cut-off) |
| Capacity |
16 Ah ( 414 Wh) |
| Protection |
- Two PCM installed with the battery pack and protects the battery from
- Keep 25.9V Li-Ion Battery pack from overcharge ( 4.2V/cell)
- Balance each cell at Max. 4.25/cell ( required voltage tolerance within 0.2V for each cell)
- Keep 25.9V Li-Ion Battery pack from overdischarge ( 2.75V/cell)
- Limit 25.9V Li-Ion Battery pack's discharging current below 45 A.
Two 7.0 Amp polyswitch installed to limit 14A max. discharging current and to protect wrong polority
Two 60o thermostat installed in two charging terminals to protect battery from overdischarged |
| Prewired |
- Two charging terminals: 6" wire of 21 AWG with two hole universal connector whcih connect to each 6,15Ah module
- Two discharging terminals: 6" wire of 16 WAG wirewith standard female Tamiya connecotor whcih connect to each 6,15Ah module
- One 24" length 2 to 1 connector adaptor ( from two male tamiya to water-proof plug ) with 16 AWG wire is included to connect two modules in parallel and form a 12.3Ah battery pack
|
| Max. Discharging Rate |
14 Amp limited by polyswitch ( lower rate avaiable upon request ) |
| Dimensions |
160mm (6.3") x 80mm(3.1") x 132 mm ( 5.2") |
| Weight |
5lbs |
| Smart Tips |
|
| Applications |
- Autonomous submarine to drive a 24V DC motor
- Replace 24V NiMH battery with higher energy and less weight
- RC robot and RC aircraft with higher energy needs
|
| Warning |
- Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks...)
- Never discharge the battery pack beyond Max. limit.
- Must read before place an order. Please download fill the form and fax back to 510-525-4728. Attn: BatteySpace-Tech.
- For safety warning please see the link here
|
|
How to Charge
Before charging the battery pack, please make sure disconnect the discharger connector, below is illustrator for charging battery pack.
How to Discharge
Connect the parallel adaptor as below illustrator: |


|