Packing	13.2V battery pack made of high quality SANYO NiMH 11x 4/3 AF cells of 4500 mAh capacity. Wrapped by heavy duty fire retardant heat shrink tube
Voltage	13.2 V ( working ) 16 V ( peak)
Capacity	4500 mAh or 59.4 wh
Charging Rate	Standard 1.8 A Max. 2.1 A
Discharging Rate	Standard rate: 2.1 Amp ( Recommended and warranted) Highest rate for continuous running: 4.5 Amp Max. Rate for short time: 8.2 Amp ( Not recommend as working rate )
Protection	One 7 amp polyswitch installed to protect short circuit
Prewired	4' length water-proof coil cable with Trailtech lockable female plug is installed in battery pack. Please make sure the connector of the pack will fit with your light. Need 13.2V two pin female water-proof NiMH pack? Please click here to buyseparately. Optional for Trai-Tech coaxis male plug? Please click here to order separately.
Dimension	4.3"(110mm) x 2.8"(70mm)x 1.4"(35mm) (LxWxH)
Net Weight	4 lb (23 Oz)
Applications	Perfect with Trailtech HID light system 4.6 hrs burntime for 13W Trailtech HID light. 2.3 hrs burtime for 26W Trialtech HID light. 2.0 hrs burntime for 30W Trailtech HID light. For other brand, you may need to change connector on your light.
Tips & Options	For faster and safer charging, please choose our 9.6-18V Universal Smart charger . The charging time is about 3 hrs at selected 1.8A current. Excluded the connector adaptor for charging. Please click here to order separately. Please click here to view how to charge the pack. ( Excluded charger and the connector adaptor) How to DIY for replacing NiteRider Classic water bottle battery ? Please click here for the information
Cautions	Temperature sensor ( BEC red connect ) need to connected to charger before charging battery pack for double protection of battery from overcharging. Please don't discharge the battery pack below 10V ( 1.0 V / cell). Deep discharge may damage NiMH battery pack. Charge battery immediately after it is discharged. Never store the battery pack below 10V. Please read more safety warning at this link before buying