Packing	12 V 10 Ah (10000mAh) NiMH Battery Pack made by 10 pcs high quality NiMH D size cells. , assembled in hump shape ( 3x3+1) Wrapped by white PVC shrink tube
Voltage	12V ( working ) 14.5V ( peak)
Capacity	10Ah or 120 wh
Charging Rate	Standard 1.8 A Max. 5 A ( for each 12V 10Ah module)
Discharging Rate	30A max. limited by thermostat
Pre-wired	Discharge terminal: Standard Male Tamiya connector with 18AWG wire Charging terminal: Mini Male Tamiya connector with 18AWG wire A 65o thermostat is installed inside battery pack to protect the battery from overcharging. and over-discharging beyond
Dimension	8.5" L x 2.6" W x 2.5"H
Net Weight	3.6 lbs
Options	Please choose 12V smart NiMH battery pack chargers ( click for detail specs) to recharging the battery pack. The charging time is about 7 hrs. Please set current level to 1.8A If you need long cycle life and lower cost per cycle, Please choose advanced LiFePO4 pack below. LiFePO4 Battery Module: 12.8V 9.6Ah (122.88Wh, 21A rate ), Replace NiMH pack with 10 times longer life LiFePo4 Battery Pack: 12V 12.8Ah (153.6Wh, 26A rate) in Aluminum-Box with PCM
Applications	Can replace Cateys HL-MH310 Bke light battery with modification. The battery can sit sown in bike bootle cage. It also can fit in 13.5Amp canister battery for Salvo / Halcyon 24W HID light with the modification of connector It may replace Salvo 10W HID diving light of 9Ah NiMH Battery pack, and get 10% more burning times. Burning time for 24W HID light is 5 hours for 10W HID Light, > 9.5 Hrs
Cautions	Please don't discharging the battery pack below 10V ( 1.0 V / cell) Deep discharging may damage NiMH battery pack. Charging battery immediately every time it is discharged. Never storage the battery pack at below 30V. Please don't use charger terminal to discharge battery Please read more safety warning at the link NOTICE: Any changes made to our battery and charger will VOID warranty.