Packing	12V 13 Ah (12000mAh) NiMH Battery Pack made by 10 pcs high quality NiMH F size cells. assembled side by side in one rows ( 10x1) Wrapped by heavy duty heat shrink tube
Voltage	12V ( working ) 14.5V ( peak)
Capacity	13Ah or 156 wh
Charging Rate	Standard 1.8 A Max. 5 A ( for each 12V 10Ah module)
Discharging Rate	Standard rate: 13 Amp ( Recommended and warranted) Highest rate for continuous running: 30Amp Max. Rate for short time: 60Amp ( Not recommend as working rate )
Pre-wired	Two terminals are in the battery pack. Charging and discharging plug are separated for protecting battery overcharging and power off during discharging Discharging plug is male standard tamiya connector with 14 AWG wires Charging plug is mini tomiya connector (with 18 AWG wires), which connected a 65o thermostat. to battery pack to protect battery from overcharging. a connector daptor from mini tamiya to standard tamiya to connect a battery charger is included
Dimension	13"(330mm)L x 1.4"(36mm)W x 3.6"(91mm)H
Net Weight	5.5 lbs
Smart Charger (included)	One 12V smart NiMH battery pack chargers is included Must charge battery from charging terminal The charging time is about 9 hrs. Please set current level to 1.8A
Applications	Perfect for walking robot -- two time running time than NiCd power pack. Perfect for Sea Scooter: 50% less weight than original SLA battery. Good for any 12 DC portable device application. Need a extra battery pack without charger? please order here
Cautions	Please don't discharging the battery pack below 10V ( 1.0 V / cell) Deep discharging may damage NiMH battery pack. Charging battery immediately every time it is discharged. Never storage the battery pack at below 10V. Please don't use charger terminal to discharge battery Please read more safety warning at the link
How To Charge The Battery Pack:	Please download Instruction manual for charging Nimh pack by Chun-180 Charger.